CAS Properties

Various properties can be specified in CAS either inside configuration files or as command line switches. This section provides a list common CAS properties and references to the underlying modules that consume them.

Note that property names can be specified in very relaxed terms. For instance cas.someProperty, cas.some-property, cas.some_property and CAS_SOME_PROPERTY are all valid names.

The following list of properties are controlled by and provided to CAS. Each block, for most use cases, corresponds to a specific CAS module that is expected to be included in the final CAS distribution prepared during the build and deployment process.

General

A number of CAS configuration options equally apply to a number of modules and features. To understand and take note of those options, please review this guide.

Configuration Storage

Standalone

CAS by default will attempt to locate settings and properties inside a given directory indicated under the setting name cas.standalone.config and otherwise falls back to using /etc/cas/config.

There also exists a cas.standalone.config.file which can be used to directly feed a collection of properties to CAS in form of a file or classpath resource. This is specially useful in cases where a bare CAS server is deployed in the cloud without the extra ceremony of a configuration server or an external directory for that matter and the deployer wishes to avoid overriding embedded configuration files.

Spring Cloud

The following settings are to be loaded by the CAS configuration runtime, which bootstraps the entire CAS running context. They are to be put inside the src/main/resources/bootstrap.properties of the configuration server itself. See this guide for more info.

The configuration server backed by Spring Cloud supports the following profiles.

Native

Load settings from external properties/yaml configuration files.

# spring.profiles.active=native

# The configuration directory where CAS should monitor to locate settings.
# spring.cloud.config.server.native.searchLocations=file:///etc/cas/config

Git Repository

Load settings from an internal/external Git repository.

# spring.profiles.active=default

# The location of the git repository that contains CAS settings.
# The location can point to an HTTP/SSH/directory.
# spring.cloud.config.server.git.uri=https://github.com/repoName/config
# spring.cloud.config.server.git.uri=file://${user.home}/config

# The credentials used to authenticate git requests, specially
# when using HTTPS. If connecting to the repository via SSH, remember
# to register your public keys with an SSH agent just as your normal would have
# with any other public repository.
# spring.cloud.config.server.git.username=
# spring.cloud.config.server.git.password=

The above configuration also applies to online git-based repositories such as Github, BitBucket, etc.

Vault

Load settings from HasiCorp's Vault.

# spring.cloud.vault.host=127.0.0.1
# spring.cloud.vault.port=8200
# spring.cloud.vault.token=1305dd6a-a754-f145-3563-2fa90b0773b7
# spring.cloud.vault.connectionTimeout=3000
# spring.cloud.vault.readTimeout=5000
# spring.cloud.vault.enabled=true
# spring.cloud.vault.fail-fast=true
# spring.cloud.vault.scheme=http
# spring.cloud.vault.generic.enabled=true
# spring.cloud.vault.generic.backend=secret

MongoDb

Load settings from a MongoDb instance.

# cas.spring.cloud.mongo.uri=mongodb://casuser:[email protected]:61954/apereocas

ZooKeeper

Load settings from an Apache ZooKeeper instance.

# spring.cloud.zookeeper.connectString=localhost:2181
# spring.cloud.zookeeper.enabled=true
# spring.cloud.zookeeper.config.enabled=true
# spring.cloud.zookeeper.maxRetries=10
# spring.cloud.zookeeper.config.root=cas/config

DynamoDb

Load settings from a DynamoDb instance.

# cas.spring.cloud.dynamodb.credentialAccessKey=
# cas.spring.cloud.dynamodb.credentialSecretKey=
# cas.spring.cloud.dynamodb.endpoint=http://localhost:8000
# cas.spring.cloud.dynamodb.localAddress=
# cas.spring.cloud.dynamodb.endpoint=
# cas.spring.cloud.dynamodb.region=
# cas.spring.cloud.dynamodb.regionOverride=

JDBC

Load settings from a RDBMS instance.

# cas.spring.cloud.jdbc.sql=SELECT id, name, value FROM CAS_SETTINGS_TABLE
# cas.spring.cloud.jdbc.url=
# cas.spring.cloud.jdbc.user=
# cas.spring.cloud.jdbc.password=
# cas.spring.cloud.jdbc.driverClass=

Configuration Security

To learn more about how sensitive CAS settings can be secured, please review this guide.

Standalone

# cas.standalone.config.security.alg=PBEWithMD5AndTripleDES
# cas.standalone.config.security.provider=BC
# cas.standalone.config.security.iterations=
# cas.standalone.config.security.psw=

The above settings may be passed to CAS using any of the strategies outline here, though it might be more secure to pass them to CAS as either command-line or system properties.

Spring Cloud

Encrypt and decrypt configuration via Spring Cloud, if the Spring Cloud configuration server is used.

# spring.cloud.config.server.encrypt.enabled=true

# encrypt.keyStore.location=file:///etc/cas/casconfigserver.jks
# encrypt.keyStore.password=keystorePassword
# encrypt.keyStore.alias=DaKey
# encrypt.keyStore.secret=changeme

Cloud Configuration Bus

CAS uses the Spring Cloud Bus to manage configuration in a distributed deployment. Spring Cloud Bus links nodes of a distributed system with a lightweight message broker.

# spring.cloud.bus.enabled=false
# spring.cloud.bus.refresh.enabled=true
# spring.cloud.bus.env.enabled=true
# spring.cloud.bus.destination=CasCloudBus
# spring.cloud.bus.ack.enabled=true

To learn more about this topic, please review this guide.

RabbitMQ

Broadcast CAS configuration updates to other nodes in the cluster via RabbitMQ.

# spring.rabbitmq.host=
# spring.rabbitmq.port=
# spring.rabbitmq.username=
# spring.rabbitmq.password=

# Or all of the above in one line
# spring.rabbitmq.addresses=

Kafka

Broadcast CAS configuration updates to other nodes in the cluster via Kafka.

# spring.cloud.stream.bindings.output.content-type=application/json
# spring.cloud.stream.kafka.binder.zkNodes=...
# spring.cloud.stream.kafka.binder.brokers=...

Embedded Container

The following properties are related to the embedded containers that ship with CAS.

server.contextPath=/cas

# By default and if you remove this setting, CAS runs on port 8080
server.port=8443

# To disable SSL configuration, comment out the following settings
# Or set to blank values.
server.ssl.keyStore=file:/etc/cas/thekeystore
server.ssl.keyStorePassword=changeit
server.ssl.keyPassword=changeit
# server.ssl.ciphers=
# server.ssl.clientAuth=
# server.ssl.enabled=
# server.ssl.keyAlias=
# server.ssl.keyStoreProvider=
# server.ssl.keyStoreType=
# server.ssl.protocol=
# server.ssl.trustStore=
# server.ssl.trustStorePassword=
# server.ssl.trustStoreProvider=
# server.ssl.trustStoreType=

server.maxHttpHeaderSize=2097152
server.useForwardHeaders=true
server.connectionTimeout=20000

Embedded Tomcat Container

# server.tomcat.basedir=build/tomcat

# server.tomcat.accesslog.enabled=true
# server.tomcat.accesslog.pattern=%t %a "%r" %s (%D ms)
# server.tomcat.accesslog.suffix=.log

# server.tomcat.maxHttpPostSize=20971520
# server.tomcat.maxThreads=5
# server.tomcat.portHeader=X-Forwarded-Port
# server.tomcat.protocolHeader=X-Forwarded-Proto
# server.tomcat.protocolHeaderHttpsValue=https
# server.tomcat.remoteIpHeader=X-FORWARDED-FOR
# server.tomcat.uriEncoding=UTF-8

HTTP Proxying

In the event that you decide to run CAS without any SSL configuration in the embedded Tomcat container and on a non-secure port yet wish to customize the connector configuration that is linked to the running port (i.e. 8080), the following settings may apply:

# cas.server.httpProxy.enabled=true
# cas.server.httpProxy.secure=true
# cas.server.httpProxy.protocol=AJP/1.3
# cas.server.httpProxy.scheme=https
# cas.server.httpProxy.redirectPort=
# cas.server.httpProxy.proxyPort=
# cas.server.httpProxy.attributes.attributeName=attributeValue

HTTP

Enable HTTP connections for the embedded Tomcat container, in addition to the configuration linked to the server.port setting.

# cas.server.http.port=8080
# cas.server.http.protocol=org.apache.coyote.http11.Http11NioProtocol
# cas.server.http.enabled=true
# cas.server.http.attributes.attributeName=attributeValue

AJP

Enable AJP connections for the embedded Tomcat container,

# cas.server.ajp.secure=false
# cas.server.ajp.enabled=false
# cas.server.ajp.proxyPort=-1
# cas.server.ajp.protocol=AJP/1.3
# cas.server.ajp.asyncTimeout=5000
# cas.server.ajp.scheme=http
# cas.server.ajp.maxPostSize=20971520
# cas.server.ajp.port=8009
# cas.server.ajp.enableLookups=false
# cas.server.ajp.redirectPort=-1
# cas.server.ajp.allowTrace=false
# cas.server.ajp.attributes.attributeName=attributeValue

SSL Valve

The Tomcat SSLValve is a way to get a client certificate from an SSL proxy (e.g. HAProxy or BigIP F5) running in front of Tomcat via an HTTP header. If you enable this, make sure your proxy is ensuring that this header doesn't originate with the client (e.g. the browser).

# cas.server.sslValve.enabled=false
# cas.server.sslValve.sslClientCertHeader=ssl_client_cert
# cas.server.sslValve.sslCipherHeader=ssl_cipher
# cas.server.sslValve.sslSessionIdHeader=ssl_session_id
# cas.server.sslValve.sslCipherUserKeySizeHeader=ssl_cipher_usekeysize

Example HAProxy Configuration (snippet) Configure SSL frontend with cert optional, redirect to cas, if cert provided, put it on header

frontend web-vip
  bind 192.168.2.10:443 ssl crt /var/lib/haproxy/certs/www.example.com.pem ca-file /var/lib/haproxy/certs/ca.pem verify optional
  mode http
  acl www-cert ssl_fc_sni if { www.example.com }
  acl empty-path path /
  http-request redirect location /cas/ if empty-path www-cert
  http-request del-header ssl_client_cert unless { ssl_fc_has_crt }
  http-request set-header ssl_client_cert -----BEGIN\ CERTIFICATE-----\ %[ssl_c_der,base64]\ -----END\ CERTIFICATE-----\  if { ssl_fc_has_crt }
  acl cas-path path_beg -i /cas
  reqadd X-Forwarded-Proto:\ https
  use_backend cas-pool if cas-path

backend cas-pool
  option httpclose
  option forwardfor
  cookie SERVERID-cas insert indirect nocache
  server cas-1 192.168.2.10:8080 check cookie cas-1

Extended Access Log Valve

Enable the extended access log for the embedded Tomcat container.

# cas.server.extAccessLog.enabled=false
# cas.server.extAccessLog.pattern=c-ip s-ip cs-uri sc-status time X-threadname x-H(secure) x-H(remoteUser)
# cas.server.extAccessLog.suffix=.log
# cas.server.extAccessLog.prefix=localhost_access_extended
# cas.server.extAccessLog.directory=

CAS Server

Identify the CAS server. name and prefix are always required settings.

A CAS host is automatically appended to the ticket ids generated by CAS. If none is specified, one is automatically detected and used by CAS.

# cas.server.name=https://cas.example.org:8443
# cas.server.prefix=https://cas.example.org:8443/cas
# cas.host.name=

CAS Banner

On startup, CAS will display a banner along with some diagnostics info. In order to skip this step and summarize, set the system property -DCAS_BANNER_SKIP=true.

Spring Boot Endpoints

The following properties describe access controls and settings for the /status endpoint of CAS which provides administrative functionality and oversight into the CAS software. These endpoints are specific to Spring Boot.

To learn more about this topic, please review this guide.

# Globally control whether endpoints are enabled
# or marked as sesitive to require authentication.
# endpoints.enabled=true
# endpoints.sensitive=true

management.contextPath=/status
management.security.enabled=true
management.security.roles=ACTUATOR,ADMIN
management.security.sessions=if_required

# Each of the below endpoints can either be disabled
# or can be marked as 'sensitive' (or not)
# to enable authentication. The global flags above control
# everything and individual settings below act as overrides.

# endpoints.restart.enabled=false
# endpoints.shutdown.enabled=false
# endpoints.autoconfig.enabled=true
# endpoints.beans.enabled=true
# endpoints.bus.enabled=true
# endpoints.configprops.enabled=true
# endpoints.dump.enabled=true
# endpoints.env.enabled=true
# endpoints.health.enabled=true
# endpoints.features.enabled=true
# endpoints.info.enabled=true
# endpoints.loggers.enabled=true
# endpoints.logfile.enabled=true
# endpoints.trace.enabled=true
# endpoints.docs.enabled=false
# endpoints.heapdump.enabled=true

# IP address may be enough to protect all endpoints.
# If you wish to protect the admin pages via CAS itself, configure the rest.
# cas.adminPagesSecurity.ip=127\.0\.0\.1
# cas.adminPagesSecurity.loginUrl=https://sso.example.org/cas/login
# cas.adminPagesSecurity.service=https://sso.example.org/cas/status/dashboard
# cas.adminPagesSecurity.users=file:/etc/cas/config/adminusers.properties
# cas.adminPagesSecurity.adminRoles[0]=ROLE_ADMIN

# cas.adminPagesSecurity.actuatorEndpointsEnabled=true

The format of the adminusers.properties file which houses a list of authorized users to access the admin pages via CAS is:

# casuser=notused,ROLE_ADMIN

The format of the file is as such:

• casuser: This is the authenticated user id received from CAS
• notused: This is the password field that isn't used by CAS. You could literally put any value you want in its place.
• ROLE_ADMIN: Role assigned to the authorized user as an attribute, which is then cross checked against CAS configuration.

Spring Boot Admin Server

To learn more about this topic, please review this guide.

# spring.boot.admin.url=https://bootadmin.example.org:8444
# spring.boot.admin.client.managementUrl=${cas.server.prefix}/status
# spring.boot.admin.client.name=Apereo CAS
# spring.boot.admin.client.metadata.user.name=
# spring.boot.admin.client.metadata.user.password=

CAS Endpoints

These are the collection of endpoints that are specific to CAS. To learn more about this topic, please review this guide.

# cas.monitor.endpoints.enabled=false
# cas.monitor.endpoints.sensitive=true

# cas.monitor.endpoints.dashboard.enabled=false
# cas.monitor.endpoints.dashboard.sensitive=true

# cas.monitor.endpoints.auditEvents.enabled=false
# cas.monitor.endpoints.auditEvents.sensitive=true

# cas.monitor.endpoints.authenticationEvents.enabled=false
# cas.monitor.endpoints.authenticationEvents.sensitive=true

# cas.monitor.endpoints.configurationState.enabled=false
# cas.monitor.endpoints.configurationState.sensitive=true

# cas.monitor.endpoints.healthCheck.enabled=false
# cas.monitor.endpoints.healthCheck.sensitive=true

# cas.monitor.endpoints.loggingConfig.enabled=false
# cas.monitor.endpoints.loggingConfig.sensitive=true

# cas.monitor.endpoints.metrics.enabled=false
# cas.monitor.endpoints.metrics.sensitive=true

# cas.monitor.endpoints.attributeResolution.enabled=false
# cas.monitor.endpoints.attributeResolution.sensitive=true

# cas.monitor.endpoints.singleSignOnReport.enabled=false
# cas.monitor.endpoints.singleSignOnReport.sensitive=true

# cas.monitor.endpoints.statistics.enabled=false
# cas.monitor.endpoints.statistics.sensitive=true

# cas.monitor.endpoints.trustedDevices.enabled=false
# cas.monitor.endpoints.trustedDevices.sensitive=true

# cas.monitor.endpoints.status.enabled=false
# cas.monitor.endpoints.status.sensitive=true

# cas.monitor.endpoints.singleSignOnStatus.enabled=false
# cas.monitor.endpoints.singleSignOnStatus.sensitive=true

# cas.monitor.endpoints.springWebflowReport.enabled=false
# cas.monitor.endpoints.springWebflowReport.sensitive=true

Securing Endpoints With Spring Security

Monitoring endpoints may also be secured by Spring Security. You can define the authentication scheme/paths via the below settings.

# security.ignored[0]=/**
security.filterOrder=0
security.requireSsl=true
security.sessions=if_required
security.user.name=<predefined-userid>
security.user.password=<predefined-password>
security.user.role=ACTUATOR

Basic Authentication

security.basic.authorizeMode=none|role|authenticated
security.basic.enabled=true
security.basic.path=/cas/status/**
security.basic.realm=CAS

JAAS Authentication

# cas.adminPagesSecurity.jaas.loginConfig=file:/path/to/config
# cas.adminPagesSecurity.jaas.refreshConfigurationOnStartup=true
# cas.adminPagesSecurity.jaas.loginContextName=

JDBC Authentication

# cas.adminPagesSecurity.jdbc.query=SELECT username,password,enabled FROM users WHERE username=?
# cas.adminPagesSecurity.jdbc.healthQuery=
# cas.adminPagesSecurity.jdbc.isolateInternalQueries=false
# cas.adminPagesSecurity.jdbc.url=jdbc:hsqldb:mem:cas-hsql-database
# cas.adminPagesSecurity.jdbc.failFast=true
# cas.adminPagesSecurity.jdbc.isolationLevelName=ISOLATION_READ_COMMITTED
# cas.adminPagesSecurity.jdbc.dialect=org.hibernate.dialect.HSQLDialect
# cas.adminPagesSecurity.jdbc.leakThreshold=10
# cas.adminPagesSecurity.jdbc.propagationBehaviorName=PROPAGATION_REQUIRED
# cas.adminPagesSecurity.jdbc.batchSize=1
# cas.adminPagesSecurity.jdbc.user=sa
# cas.adminPagesSecurity.jdbc.ddlAuto=create-drop
# cas.adminPagesSecurity.jdbc.maxAgeDays=180
# cas.adminPagesSecurity.jdbc.password=
# cas.adminPagesSecurity.jdbc.autocommit=false
# cas.adminPagesSecurity.jdbc.driverClass=org.hsqldb.jdbcDriver
# cas.adminPagesSecurity.jdbc.idleTimeout=5000
# cas.adminPagesSecurity.jdbc.dataSourceName=
# cas.adminPagesSecurity.jdbc.dataSourceProxy=false

LDAP Authentication

# cas.adminPagesSecurity.ldap.type=AD|AUTHENTICATED|DIRECT|ANONYMOUS

# cas.adminPagesSecurity.ldap.ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.adminPagesSecurity.ldap.connectionStrategy=
# cas.adminPagesSecurity.ldap.useSsl=true
# cas.adminPagesSecurity.ldap.useStartTls=false
# cas.adminPagesSecurity.ldap.connectTimeout=5000
# cas.adminPagesSecurity.ldap.baseDn=dc=example,dc=org
# cas.adminPagesSecurity.ldap.userFilter=cn={user}
# cas.adminPagesSecurity.ldap.subtreeSearch=true
# cas.adminPagesSecurity.ldap.bindDn=cn=Directory Manager,dc=example,dc=org
# cas.adminPagesSecurity.ldap.bindCredential=Password

# cas.adminPagesSecurity.ldap.enhanceWithEntryResolver=true
# cas.adminPagesSecurity.ldap.dnFormat=uid=%s,ou=people,dc=example,dc=org
# cas.adminPagesSecurity.ldap.principalAttributePassword=password

# cas.adminPagesSecurity.ldap.saslMechanism=GSSAPI|DIGEST_MD5|CRAM_MD5|EXTERNAL
# cas.adminPagesSecurity.ldap.saslRealm=EXAMPLE.COM
# cas.adminPagesSecurity.ldap.saslAuthorizationId=
# cas.adminPagesSecurity.ldap.saslMutualAuth=
# cas.adminPagesSecurity.ldap.saslQualityOfProtection=

# cas.adminPagesSecurity.ldap.trustCertificates=
# cas.adminPagesSecurity.ldap.keystore=
# cas.adminPagesSecurity.ldap.keystorePassword=
# cas.adminPagesSecurity.ldap.keystoreType=JKS|JCEKS|PKCS12

# cas.adminPagesSecurity.ldap.poolPassivator=NONE|CLOSE|BIND
# cas.adminPagesSecurity.ldap.minPoolSize=3
# cas.adminPagesSecurity.ldap.maxPoolSize=10
# cas.adminPagesSecurity.ldap.validateOnCheckout=true
# cas.adminPagesSecurity.ldap.validatePeriodically=true
# cas.adminPagesSecurity.ldap.validatePeriod=600
# cas.adminPagesSecurity.ldap.validateTimeout=5000

# cas.adminPagesSecurity.ldap.ldapAuthz.groupAttribute=
# cas.adminPagesSecurity.ldap.ldapAuthz.groupPrefix=
# cas.adminPagesSecurity.ldap.ldapAuthz.groupFilter=
# cas.adminPagesSecurity.ldap.ldapAuthz.rolePrefix=ROLE_
# cas.adminPagesSecurity.ldap.ldapAuthz.roleAttribute=uugid

Web Application Session

Control the CAS web application session behavior as it's treated by the underlying servlet container engine.

# server.session.timeout=300
# server.session.cookie.httpOnly=true
# server.session.trackingModes=COOKIE

Views

Control how CAS should treat views and other UI elements.

To learn more about this topic, please review this guide.

spring.thymeleaf.encoding=UTF-8

# Controls  whether views should be cached by CAS.
# When turned on, ad-hoc chances to views are not automatically
# picked up by CAS until a restart. Small incremental performance
# improvements are to be expected.
spring.thymeleaf.cache=true

# Instruct CAS to locate views at the below location.
# This location can be externalized to a directory outside
# the cas web application.
# spring.thymeleaf.prefix=classpath:/templates/

# Indicate where core CAS-protocol related views should be found
# in the view directory hierarchy.
# cas.view.cas2.success=protocol/2.0/casServiceValidationSuccess
# cas.view.cas2.failure=protocol/2.0/casServiceValidationFailure
# cas.view.cas2.proxy.success=protocol/2.0/casProxySuccessView
# cas.view.cas2.proxy.failure=protocol/2.0/casProxyFailureView
# cas.view.cas3.success=protocol/3.0/casServiceValidationSuccess
# cas.view.cas3.failure=protocol/3.0/casServiceValidationFailure

# Defines a default URL to which CAS may redirect if there is no service
# provided in the authentication request.
# cas.view.defaultRedirectUrl=https://www.github.com

Logging

Control the location and other settings of the CAS logging configuration. To learn more about this topic, please review this guide.

# logging.config=file:/etc/cas/log4j2.xml
server.contextParameters.isLog4jAutoInitializationDisabled=true

# Control log levels via properties
# logging.level.org.apereo.cas=DEBUG

To disable log sanitization, start the container with the system property CAS_TICKET_ID_SANITIZE_SKIP=true.

AspectJ Configuration

# spring.aop.auto=true
# spring.aop.proxyTargetClass=true

Authentication Attributes

Set of authentication attributes that are retrieved by the principal resolution process, typically via some component of Person Directory from a number of attribute sources unless noted otherwise by the specific authentication scheme.

If multiple attribute repository sources are defined, they are added into a list and their results are cached and merged.

# cas.authn.attributeRepository.expireInMinutes=30
# cas.authn.attributeRepository.maximumCacheSize=10000
# cas.authn.attributeRepository.merger=REPLACE|ADD|MERGE

Attributes for all sources are defined in their own individual block. CAS does not care about the source owner of attributes. It finds them where they can be found and otherwise, it moves on. This means that certain number of attributes can be resolved via one source and the remaining attributes may be resolved via another. If there are commonalities across sources, the merger shall decide the final result and behavior.

The story in plain english is:

• I have a bunch of attributes that I wish to resolve for the authenticated principal.
• I have a bunch of sources from which said attributes are retrieved.
• Figure it out.

Note that attribute repository sources, if/when defined, execute in a specific order. This is important to take into account when attribute merging may take place. By default, the execution order is the following but can be adjusted per source:

1. LDAP
2. JDBC
3. JSON
4. Groovy
5. Internet2 Grouper
6. Shibboleth
7. Stub

Note that if no explicit attribute mappings are defined, all permitted attributes on the record may be retrieved by CAS from the attribute repository source and made available to the principal. On the other hand, if explicit attribute mappings are defined, then only mapped attributes are retrieved.

Merging Strategies

The following mergeing strategies can be used to resolve conflicts when the same attribute are found from multiple sources:

Stub

Static attributes that need to be mapped to a hardcoded value belong here.

# cas.authn.attributeRepository.stub.attributes.uid=uid
# cas.authn.attributeRepository.stub.attributes.displayName=displayName
# cas.authn.attributeRepository.stub.attributes.cn=commonName
# cas.authn.attributeRepository.stub.attributes.affiliation=groupMembership

LDAP

If you wish to directly and separately retrieve attributes from an LDAP source, the following settings are then relevant:

# cas.authn.attributeRepository.ldap[0].attributes.uid=uid
# cas.authn.attributeRepository.ldap[0].attributes.displayName=displayName
# cas.authn.attributeRepository.ldap[0].attributes.cn=commonName
# cas.authn.attributeRepository.ldap[0].attributes.affiliation=groupMembership

# cas.authn.attributeRepository.ldap[0].ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.authn.attributeRepository.ldap[0].connectionStrategy=
# cas.authn.attributeRepository.ldap[0].order=0
# cas.authn.attributeRepository.ldap[0].useSsl=true
# cas.authn.attributeRepository.ldap[0].useStartTls=false
# cas.authn.attributeRepository.ldap[0].connectTimeout=5000
# cas.authn.attributeRepository.ldap[0].baseDn=dc=example,dc=org
# cas.authn.attributeRepository.ldap[0].userFilter=cn={user}
# cas.authn.attributeRepository.ldap[0].subtreeSearch=true
# cas.authn.attributeRepository.ldap[0].bindDn=cn=Directory Manager,dc=example,dc=org
# cas.authn.attributeRepository.ldap[0].bindCredential=Password
# cas.authn.attributeRepository.ldap[0].trustCertificates=
# cas.authn.attributeRepository.ldap[0].keystore=
# cas.authn.attributeRepository.ldap[0].keystorePassword=
# cas.authn.attributeRepository.ldap[0].keystoreType=JKS|JCEKS|PKCS12
# cas.authn.attributeRepository.ldap[0].poolPassivator=NONE|CLOSE|BIND
# cas.authn.attributeRepository.ldap[0].minPoolSize=3
# cas.authn.attributeRepository.ldap[0].maxPoolSize=10
# cas.authn.attributeRepository.ldap[0].validateOnCheckout=true
# cas.authn.attributeRepository.ldap[0].validatePeriodically=true
# cas.authn.attributeRepository.ldap[0].validatePeriod=600
# cas.authn.attributeRepository.ldap[0].validateTimeout=5000
# cas.authn.attributeRepository.ldap[0].failFast=true
# cas.authn.attributeRepository.ldap[0].idleTime=500
# cas.authn.attributeRepository.ldap[0].prunePeriod=600
# cas.authn.attributeRepository.ldap[0].blockWaitTime=5000
# cas.authn.attributeRepository.ldap[0].providerClass=org.ldaptive.provider.unboundid.UnboundIDProvider

# cas.authn.attributeRepository.ldap[0].validator.type=NONE|SEARCH|COMPARE
# cas.authn.attributeRepository.ldap[0].validator.baseDn=
# cas.authn.attributeRepository.ldap[0].validator.searchFilter=(objectClass=*)
# cas.authn.attributeRepository.ldap[0].validator.scope=OBJECT|ONELEVEL|SUBTREE
# cas.authn.attributeRepository.ldap[0].validator.attributeName=objectClass
# cas.authn.attributeRepository.ldap[0].validator.attributeValues=top
# cas.authn.attributeRepository.ldap[0].validator.dn=

Groovy

If you wish to directly and separately retrieve attributes from a Groovy script, the following settings are then relevant:

# cas.authn.attributeRepository.groovy[0].config.location=file:/etc/cas/attributes.groovy
# cas.authn.attributeRepository.groovy[0].caseInsensitive=false
# cas.authn.attributeRepository.groovy[0].order=0

The Groovy script may be designed as:

import java.util.List
import java.util.Map

class SampleGroovyPersonAttributeDao {
    def Map<String, List<Object>> run(final Object... args) {
        def uid = args[0]
        def logger = args[1];
        def casProperties = args[2]
        def casApplicationContext = args[3]

        logger.debug("[{}]: The received uid is [{}]", this.class.simpleName, uid)
        return[username:[uid], likes:["cheese", "food"], id:[1234,2,3,4,5], another:"attribute"]
    }
}

JSON

If you wish to directly and separately retrieve attributes from a static JSON source, the following settings are then relevant:

# cas.authn.attributeRepository.json[0].config.location=file://etc/cas/attribute-repository.json
# cas.authn.attributeRepository.json[0].order=0

The format of the file may be:

{
    "user1": {
        "firstName":["Json1"],
        "lastName":["One"]
    },
    "user2": {
        "firstName":["Json2"],
        "eduPersonAffiliation":["employee", "student"]
    }
}

JDBC

If you wish to directly and separately retrieve attributes from a JDBC source, the following settings are then relevant:

# cas.authn.attributeRepository.jdbc[0].attributes.uid=uid
# cas.authn.attributeRepository.jdbc[0].attributes.displayName=displayName
# cas.authn.attributeRepository.jdbc[0].attributes.cn=commonName
# cas.authn.attributeRepository.jdbc[0].attributes.affiliation=groupMembership

# cas.authn.attributeRepository.jdbc[0].singleRow=true
# cas.authn.attributeRepository.jdbc[0].order=0
# cas.authn.attributeRepository.jdbc[0].requireAllAttributes=true
# cas.authn.attributeRepository.jdbc[0].caseCanonicalization=NONE|LOWER|UPPER
# cas.authn.attributeRepository.jdbc[0].queryType=OR|AND

# Used only when there is a mapping of many rows to one user
# cas.authn.attributeRepository.jdbc[0].columnMappings.columnAttrName1=columnAttrValue1
# cas.authn.attributeRepository.jdbc[0].columnMappings.columnAttrName2=columnAttrValue2
# cas.authn.attributeRepository.jdbc[0].columnMappings.columnAttrName3=columnAttrValue3

# cas.authn.attributeRepository.jdbc[0].sql=SELECT * FROM table WHERE {0}
# cas.authn.attributeRepository.jdbc[0].username=uid
# cas.authn.attributeRepository.jdbc[0].healthQuery=
# cas.authn.attributeRepository.jdbc[0].isolateInternalQueries=false
# cas.authn.attributeRepository.jdbc[0].url=jdbc:hsqldb:mem:cas-hsql-database
# cas.authn.attributeRepository.jdbc[0].failFast=true
# cas.authn.attributeRepository.jdbc[0].isolationLevelName=ISOLATION_READ_COMMITTED
# cas.authn.attributeRepository.jdbc[0].dialect=org.hibernate.dialect.HSQLDialect
# cas.authn.attributeRepository.jdbc[0].leakThreshold=10
# cas.authn.attributeRepository.jdbc[0].propagationBehaviorName=PROPAGATION_REQUIRED
# cas.authn.attributeRepository.jdbc[0].batchSize=1
# cas.authn.attributeRepository.jdbc[0].user=sa
# cas.authn.attributeRepository.jdbc[0].ddlAuto=create-drop
# cas.authn.attributeRepository.jdbc[0].password=
# cas.authn.attributeRepository.jdbc[0].autocommit=false
# cas.authn.attributeRepository.jdbc[0].driverClass=org.hsqldb.jdbcDriver
# cas.authn.attributeRepository.jdbc[0].idleTimeout=5000
# cas.authn.attributeRepository.jdbc[0].pool.suspension=false
# cas.authn.attributeRepository.jdbc[0].pool.minSize=6
# cas.authn.attributeRepository.jdbc[0].pool.maxSize=18
# cas.authn.attributeRepository.jdbc[0].pool.maxWait=2000
# cas.authn.attributeRepository.jdbc[0].dataSourceName=
# cas.authn.attributeRepository.jdbc[0].dataSourceProxy=false

Grouper

This option reads all the groups from a Grouper instance for the given CAS principal and adopts them as CAS attributes under a grouperGroups multi-valued attribute. To learn more about this topic, please review this guide.

# cas.authn.attributeRepository.grouper[0].enabled=true

You will also need to ensure grouper.client.properties is available on the classpath (i.e. src/main/resources) with the following configured properties:

grouperClient.webService.url = http://192.168.99.100:32768/grouper-ws/servicesRest
grouperClient.webService.login = banderson
grouperClient.webService.password = password

Shibboleth Attribute Resolver

To learn more about this topic, please review this guide.

# cas.shibAttributeResolver.resources=classpath:/attribute-resolver.xml

Shibboleth Integrations

To learn more about this topic, please review this guide.

# cas.authn.shibIdP.serverUrl=https://idp.example.org

Default Bundle

If you wish to release a default bundle of attributes to all applications, and you would rather not duplicate the same attribute per every service definition, then the following settings are relevant:

# cas.authn.attributeRepository.defaultAttributesToRelease=cn,givenName,uid,affiliation

To learn more about this topic, please review this guide.

Protocol Attributes

Defines whether CAS should include and release protocol attributes defined in the specification in addition to the principal attribute.

# cas.authn.releaseProtocolAttributes=true

Principal Resolution

In the event that a separate resolver is put into place, control how the final principal should be constructed by default.

# cas.personDirectory.principalAttribute=
# cas.personDirectory.returnNull=false
# cas.personDirectory.principalResolutionFailureFatal=false

Authentication Policy

To learn more about this topic, please review this guide.

Global authentication policy that is applied when CAS attempts to vend and validate tickets.

# cas.authn.policy.requiredHandlerAuthenticationPolicyEnabled=false

Any

Satisfied if any handler succeeds. Supports a tryAll flag to avoid short circuiting and try every handler even if one prior succeeded.

# cas.authn.policy.any.tryAll=false

All

Satisfied if and only if all given credentials are successfully authenticated. Support for multiple credentials is new in CAS and this handler would only be acceptable in a multi-factor authentication situation.

# cas.authn.policy.all.enabled=true

NotPrevented

Satisfied if an only if the authentication event is not blocked by a PreventedException.

# cas.authn.policy.notPrevented.enabled=true

Required

Satisfied if an only if a specified handler successfully authenticates its credential.

# cas.authn.policy.req.tryAll=false
# cas.authn.policy.req.handlerName=handlerName
# cas.authn.policy.req.enabled=true

Authentication Throttling

CAS provides a facility for limiting failed login attempts to support password guessing and related abuse scenarios. To learn more about this topic, please review this guide.

# cas.authn.throttle.usernameParameter=username
# cas.authn.throttle.startDelay=10000
# cas.authn.throttle.repeatInterval=20000
# cas.authn.throttle.appcode=CAS

# cas.authn.throttle.failure.threshold=100
# cas.authn.throttle.failure.code=AUTHENTICATION_FAILED
# cas.authn.throttle.failure.rangeSeconds=60

Database

Queries the data source used by the CAS audit facility to prevent successive failed login attempts for a particular username from the same IP address.

# cas.authn.throttle.jdbc.auditQuery=SELECT AUD_DATE FROM COM_AUDIT_TRAIL WHERE AUD_CLIENT_IP = ? AND AUD_USER = ? \
#                                    AND AUD_ACTION = ? AND APPLIC_CD = ? AND AUD_DATE >= ? ORDER BY AUD_DATE DESC
# cas.authn.throttle.jdbc.healthQuery=
# cas.authn.throttle.jdbc.isolateInternalQueries=false
# cas.authn.throttle.jdbc.url=jdbc:hsqldb:mem:cas-hsql-database
# cas.authn.throttle.jdbc.failFast=true
# cas.authn.throttle.jdbc.isolationLevelName=ISOLATION_READ_COMMITTED
# cas.authn.throttle.jdbc.dialect=org.hibernate.dialect.HSQLDialect
# cas.authn.throttle.jdbc.leakThreshold=10
# cas.authn.throttle.jdbc.propagationBehaviorName=PROPAGATION_REQUIRED
# cas.authn.throttle.jdbc.batchSize=1
# cas.authn.throttle.jdbc.user=sa
# cas.authn.throttle.jdbc.ddlAuto=create-drop
# cas.authn.throttle.jdbc.maxAgeDays=180
# cas.authn.throttle.jdbc.password=
# cas.authn.throttle.jdbc.autocommit=false
# cas.authn.throttle.jdbc.driverClass=org.hsqldb.jdbcDriver
# cas.authn.throttle.jdbc.idleTimeout=5000

# cas.authn.throttle.jdbc.pool.suspension=false
# cas.authn.throttle.jdbc.pool.minSize=6
# cas.authn.throttle.jdbc.pool.maxSize=18
# cas.authn.throttle.jdbc.pool.maxWait=2000
# cas.authn.throttle.jdbc.dataSourceName=
# cas.authn.throttle.jdbc.dataSourceProxy=false

Adaptive Authentication

Control how CAS authentication should adapt itself to incoming client requests. To learn more about this topic, please review this guide.

# cas.authn.adaptive.rejectCountries=United.+
# cas.authn.adaptive.rejectBrowsers=Gecko.+
# cas.authn.adaptive.rejectIpAddresses=127.+

# cas.authn.adaptive.requireMultifactor.mfa-duo=127.+|United.+|Gecko.+

Surrogate Authentication

Authenticate on behalf of another user. To learn more about this topic, please review this guide.

# cas.authn.surrogate.separator=+

Static Surrogate Accounts

# cas.authn.surrogate.simple.surrogates.casuser=jsmith,jsmith2
# cas.authn.surrogate.simple.surrogates.casuser2=jsmith4,jsmith2

JSON Surrogate Accounts

# cas.authn.surrogate.json.config.location=file:/etc/cas/config/surrogates.json

LDAP Surrogate Accounts

# cas.authn.surrogate.ldap.baseDn=
# cas.authn.surrogate.ldap.searchFilter=principal={user}
# cas.authn.surrogate.ldap.surrogateSearchFilter=(&(principal={user})(memberOf=cn=edu:example:cas:something:{user},dc=example,dc=edu))
# cas.authn.surrogate.ldap.memberAttributeName=memberOf
# cas.authn.surrogate.ldap.memberAttributeValueRegex=cn=edu:example:cas:something:([^,]+),.+

Risk-based Authentication

Evaluate suspicious authentication requests and take action. To learn more about this topic, please review this guide.

# cas.authn.adaptive.risk.threshold=0.6
# cas.authn.adaptive.risk.daysInRecentHistory=30

# cas.authn.adaptive.risk.ip.enabled=false

# cas.authn.adaptive.risk.agent.enabled=false

# cas.authn.adaptive.risk.geoLocation.enabled=false

# cas.authn.adaptive.risk.dateTime.enabled=false
# cas.authn.adaptive.risk.dateTime.windowInHours=2

# cas.authn.adaptive.risk.response.blockAttempt=false

# cas.authn.adaptive.risk.response.mfaProvider=
# cas.authn.adaptive.risk.response.riskyAuthenticationAttribute=triggeredRiskBasedAuthentication

# cas.authn.adaptive.risk.response.mail.from=
# cas.authn.adaptive.risk.response.mail.text=
# cas.authn.adaptive.risk.response.mail.subject=
# cas.authn.adaptive.risk.response.mail.cc=
# cas.authn.adaptive.risk.response.mail.bcc=
# cas.authn.adaptive.risk.response.mail.attributeName=mail

# cas.authn.adaptive.risk.response.sms.from=
# cas.authn.adaptive.risk.response.sms.text=
# cas.authn.adaptive.risk.response.sms.attributeName=phone

Email Submissions

# spring.mail.host=
# spring.mail.port=
# spring.mail.username=
# spring.mail.password=
# spring.mail.testConnection=true
# spring.mail.properties.mail.smtp.auth=true
# spring.mail.properties.mail.smtp.starttls.enable=true

SMS Messaging

To learn more about this topic, please review this guide.

Twillio

# cas.twilio.accountId=
# cas.twilio.token=

TextMagic

# cas.textMagic.username=
# cas.textMagic.token=

Clickatell

# cas.clickatell.serverUrl=https://platform.clickatell.com/messages
# cas.clickatell.token=

GeoTracking

To learn more about this topic, please review this guide.

GoogleMaps GeoTracking

Used to geo-profile authentication events.

# cas.googleMaps.apiKey=
# cas.googleMaps.clientId=
# cas.googleMaps.clientSecret=
# cas.googleMaps.connectTimeout=3000
# cas.googleMaps.googleAppsEngine=false

Maxmind GeoTracking

Used to geo-profile authentication events.

# cas.maxmind.cityDatabase=file:/etc/cas/maxmind/GeoLite2-City.mmdb
# cas.maxmind.countryDatabase=file:/etc/cas/maxmind/GeoLite2-Country.mmdb

Digest Authentication

To learn more about this topic, please review this guide.

# cas.authn.digest.users.casuser=3530292c24102bac7ced2022e5f1036a
# cas.authn.digest.users.anotheruser=7530292c24102bac7ced2022e5f1036b
# cas.authn.digest.realm=CAS
# cas.authn.digest.name=
# cas.authn.digest.authenticationMethod=auth

Radius Authentication

To learn more about this topic, please review this guide.

# cas.authn.radius.server.nasPortId=-1
# cas.authn.radius.server.nasRealPort=-1
# cas.authn.radius.server.protocol=EAP_MSCHAPv2
# cas.authn.radius.server.retries=3
# cas.authn.radius.server.nasPortType=-1
# cas.authn.radius.server.nasPort=-1
# cas.authn.radius.server.nasIpAddress=
# cas.authn.radius.server.nasIpv6Address=
# cas.authn.radius.server.nasIdentifier=-1

# cas.authn.radius.client.authenticationPort=1812
# cas.authn.radius.client.sharedSecret=N0Sh@ar3d$ecReT
# cas.authn.radius.client.socketTimeout=0
# cas.authn.radius.client.inetAddress=localhost
# cas.authn.radius.client.accountingPort=1813

# cas.authn.radius.name=
# cas.authn.radius.failoverOnException=false
# cas.authn.radius.failoverOnAuthenticationFailure=false

# cas.authn.radius.passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.radius.passwordEncoder.characterEncoding=
# cas.authn.radius.passwordEncoder.encodingAlgorithm=
# cas.authn.radius.passwordEncoder.secret=
# cas.authn.radius.passwordEncoder.strength=16

# cas.authn.radius.principalTransformation.suffix=
# cas.authn.radius.principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.radius.principalTransformation.prefix=

File (Whitelist) Authentication

To learn more about this topic, please review this guide.

# cas.authn.file.separator=::
# cas.authn.file.filename=file:///path/to/users/file
# cas.authn.file.name=

# cas.authn.file.passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.file.passwordEncoder.characterEncoding=
# cas.authn.file.passwordEncoder.encodingAlgorithm=
# cas.authn.file.passwordEncoder.secret=
# cas.authn.file.passwordEncoder.strength=16

# cas.authn.file.principalTransformation.suffix=
# cas.authn.file.principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.file.principalTransformation.prefix=

Reject Users (Blacklist) Authentication

To learn more about this topic, please review this guide.

# cas.authn.reject.users=user1,user2
# cas.authn.reject.name=

# cas.authn.reject.passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.reject.passwordEncoder.characterEncoding=
# cas.authn.reject.passwordEncoder.encodingAlgorithm=
# cas.authn.reject.passwordEncoder.secret=
# cas.authn.reject.passwordEncoder.strength=16

# cas.authn.reject.principalTransformation.suffix=
# cas.authn.reject.principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.reject.principalTransformation.prefix=

Database Authentication

To learn more about this topic, please review this guide.

Query Database Authentication

Authenticates a user by comparing the user password (which can be encoded with a password encoder) against the password on record determined by a configurable database query.

# cas.authn.jdbc.query[0].sql=SELECT * FROM table WHERE name=?
# cas.authn.jdbc.query[0].healthQuery=
# cas.authn.jdbc.query[0].isolateInternalQueries=false
# cas.authn.jdbc.query[0].url=jdbc:hsqldb:mem:cas-hsql-database
# cas.authn.jdbc.query[0].failFast=true
# cas.authn.jdbc.query[0].isolationLevelName=ISOLATION_READ_COMMITTED
# cas.authn.jdbc.query[0].dialect=org.hibernate.dialect.HSQLDialect
# cas.authn.jdbc.query[0].leakThreshold=10
# cas.authn.jdbc.query[0].propagationBehaviorName=PROPAGATION_REQUIRED
# cas.authn.jdbc.query[0].batchSize=1
# cas.authn.jdbc.query[0].user=user
# cas.authn.jdbc.query[0].ddlAuto=create-drop
# cas.authn.jdbc.query[0].maxAgeDays=180
# cas.authn.jdbc.query[0].password=secret
# cas.authn.jdbc.query[0].autocommit=false
# cas.authn.jdbc.query[0].driverClass=org.hsqldb.jdbcDriver
# cas.authn.jdbc.query[0].idleTimeout=5000
# cas.authn.jdbc.query[0].credentialCriteria=
# cas.authn.jdbc.query[0].name=
# cas.authn.jdbc.query[0].order=0
# cas.authn.jdbc.query[0].dataSourceName=
# cas.authn.jdbc.query[0].dataSourceProxy=false

# cas.authn.jdbc.query[0].fieldPassword=password
# cas.authn.jdbc.query[0].fieldExpired=
# cas.authn.jdbc.query[0].fieldDisabled=
# cas.authn.jdbc.query[0].principalAttributeList=sn,cn:commonName,givenName

# cas.authn.jdbc.query[0].passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.jdbc.query[0].passwordEncoder.characterEncoding=
# cas.authn.jdbc.query[0].passwordEncoder.encodingAlgorithm=
# cas.authn.jdbc.query[0].passwordEncoder.secret=
# cas.authn.jdbc.query[0].passwordEncoder.strength=16

# cas.authn.jdbc.query[0].principalTransformation.suffix=
# cas.authn.jdbc.query[0].principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.jdbc.query[0].principalTransformation.prefix=

Search Database Authentication

Searches for a user record by querying against a username and password; the user is authenticated if at least one result is found.

# cas.authn.jdbc.search[0].fieldUser=
# cas.authn.jdbc.search[0].tableUsers=
# cas.authn.jdbc.search[0].fieldPassword=
# cas.authn.jdbc.search[0].healthQuery=
# cas.authn.jdbc.search[0].isolateInternalQueries=false
# cas.authn.jdbc.search[0].url=jdbc:hsqldb:mem:cas-hsql-database
# cas.authn.jdbc.search[0].failFast=true
# cas.authn.jdbc.search[0].isolationLevelName=ISOLATION_READ_COMMITTED
# cas.authn.jdbc.search[0].dialect=org.hibernate.dialect.HSQLDialect
# cas.authn.jdbc.search[0].leakThreshold=10
# cas.authn.jdbc.search[0].propagationBehaviorName=PROPAGATION_REQUIRED
# cas.authn.jdbc.search[0].batchSize=1
# cas.authn.jdbc.search[0].user=sa
# cas.authn.jdbc.search[0].ddlAuto=create-drop
# cas.authn.jdbc.search[0].maxAgeDays=180
# cas.authn.jdbc.search[0].password=
# cas.authn.jdbc.search[0].autocommit=false
# cas.authn.jdbc.search[0].driverClass=org.hsqldb.jdbcDriver
# cas.authn.jdbc.search[0].idleTimeout=5000
# cas.authn.jdbc.search[0].credentialCriteria=
# cas.authn.jdbc.search[0].name=
# cas.authn.jdbc.search[0].order=0
# cas.authn.jdbc.search[0].dataSourceName=
# cas.authn.jdbc.search[0].dataSourceProxy=false

# cas.authn.jdbc.search[0].passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.jdbc.search[0].passwordEncoder.characterEncoding=
# cas.authn.jdbc.search[0].passwordEncoder.encodingAlgorithm=
# cas.authn.jdbc.search[0].passwordEncoder.secret=
# cas.authn.jdbc.search[0].passwordEncoder.strength=16

# cas.authn.jdbc.search[0].principalTransformation.suffix=
# cas.authn.jdbc.search[0].principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.jdbc.search[0].principalTransformation.prefix=

Bind Database Authentication

Authenticates a user by attempting to create a database connection using the username and (hashed) password.

# cas.authn.jdbc.bind[0].healthQuery=
# cas.authn.jdbc.bind[0].isolateInternalQueries=false
# cas.authn.jdbc.bind[0].url=jdbc:hsqldb:mem:cas-hsql-database
# cas.authn.jdbc.bind[0].failFast=true
# cas.authn.jdbc.bind[0].isolationLevelName=ISOLATION_READ_COMMITTED
# cas.authn.jdbc.bind[0].dialect=org.hibernate.dialect.HSQLDialect
# cas.authn.jdbc.bind[0].leakThreshold=10
# cas.authn.jdbc.bind[0].propagationBehaviorName=PROPAGATION_REQUIRED
# cas.authn.jdbc.bind[0].batchSize=1
# cas.authn.jdbc.bind[0].user=sa
# cas.authn.jdbc.bind[0].ddlAuto=create-drop
# cas.authn.jdbc.bind[0].maxAgeDays=180
# cas.authn.jdbc.bind[0].password=
# cas.authn.jdbc.bind[0].autocommit=false
# cas.authn.jdbc.bind[0].driverClass=org.hsqldb.jdbcDriver
# cas.authn.jdbc.bind[0].idleTimeout=5000
# cas.authn.jdbc.bind[0].credentialCriteria=
# cas.authn.jdbc.bind[0].name=
# cas.authn.jdbc.bind[0].order=0
# cas.authn.jdbc.bind[0].dataSourceName=
# cas.authn.jdbc.bind[0].dataSourceProxy=false
# cas.authn.jdbc.bind[0].passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.jdbc.bind[0].passwordEncoder.characterEncoding=
# cas.authn.jdbc.bind[0].passwordEncoder.encodingAlgorithm=
# cas.authn.jdbc.bind[0].passwordEncoder.secret=
# cas.authn.jdbc.bind[0].passwordEncoder.strength=16

# cas.authn.jdbc.bind[0].principalTransformation.suffix=
# cas.authn.jdbc.bind[0].principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.jdbc.bind[0].principalTransformation.prefix=

Encode Database Authentication

A JDBC querying handler that will pull back the password and the private salt value for a user and validate the encoded password using the public salt value. Assumes everything is inside the same database table. Supports settings for number of iterations as well as private salt.

This password encoding method combines the private Salt and the public salt which it prepends to the password before hashing. If multiple iterations are used, the bytecode hash of the first iteration is rehashed without the salt values. The final hash is converted to hex before comparing it to the database value.

# cas.authn.jdbc.encode[0].numberOfIterations=0
# cas.authn.jdbc.encode[0].numberOfIterationsFieldName=numIterations
# cas.authn.jdbc.encode[0].saltFieldName=salt
# cas.authn.jdbc.encode[0].staticSalt=
# cas.authn.jdbc.encode[0].sql=
# cas.authn.jdbc.encode[0].algorithmName=
# cas.authn.jdbc.encode[0].passwordFieldName=password
# cas.authn.jdbc.encode[0].expiredFieldName=
# cas.authn.jdbc.encode[0].disabledFieldName=
# cas.authn.jdbc.encode[0].healthQuery=
# cas.authn.jdbc.encode[0].isolateInternalQueries=false
# cas.authn.jdbc.encode[0].url=jdbc:hsqldb:mem:cas-hsql-database
# cas.authn.jdbc.encode[0].failFast=true
# cas.authn.jdbc.encode[0].isolationLevelName=ISOLATION_READ_COMMITTED
# cas.authn.jdbc.encode[0].dialect=org.hibernate.dialect.HSQLDialect
# cas.authn.jdbc.encode[0].leakThreshold=10
# cas.authn.jdbc.encode[0].propagationBehaviorName=PROPAGATION_REQUIRED
# cas.authn.jdbc.encode[0].batchSize=1
# cas.authn.jdbc.encode[0].user=sa
# cas.authn.jdbc.encode[0].ddlAuto=create-drop
# cas.authn.jdbc.encode[0].maxAgeDays=180
# cas.authn.jdbc.encode[0].password=
# cas.authn.jdbc.encode[0].autocommit=false
# cas.authn.jdbc.encode[0].driverClass=org.hsqldb.jdbcDriver
# cas.authn.jdbc.encode[0].idleTimeout=5000
# cas.authn.jdbc.encode[0].credentialCriteria=
# cas.authn.jdbc.encode[0].name=
# cas.authn.jdbc.encode[0].order=0
# cas.authn.jdbc.encode[0].dataSourceName=
# cas.authn.jdbc.encode[0].dataSourceProxy=false
# cas.authn.jdbc.encode[0].passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.jdbc.encode[0].passwordEncoder.characterEncoding=
# cas.authn.jdbc.encode[0].passwordEncoder.encodingAlgorithm=
# cas.authn.jdbc.encode[0].passwordEncoder.secret=
# cas.authn.jdbc.encode[0].passwordEncoder.strength=16

# cas.authn.jdbc.encode[0].principalTransformation.suffix=
# cas.authn.jdbc.encode[0].principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.jdbc.encode[0].principalTransformation.prefix=

MongoDb Authentication

To learn more about this topic, please review this guide.

# cas.authn.mongo.mongoHostUri=mongodb://uri
# cas.authn.mongo.usernameAttribute=username
# cas.authn.mongo.attributes=
# cas.authn.mongo.passwordAttribute=password
# cas.authn.mongo.collectionName=users
# cas.authn.mongo.name=

# cas.authn.mongo.principalTransformation.suffix=
# cas.authn.mongo.principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.mongo.principalTransformation.prefix=

# cas.authn.mongo.passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.mongo.passwordEncoder.characterEncoding=
# cas.authn.mongo.passwordEncoder.encodingAlgorithm=
# cas.authn.mongo.passwordEncoder.secret=
# cas.authn.mongo.passwordEncoder.strength=16

LDAP Authentication

CAS authenticates a username/password against an LDAP directory such as Active Directory or OpenLDAP. There are numerous directory architectures and we provide configuration for four common cases.

Note that CAS will automatically create the appropriate components internally based on the settings specified below. If you wish to authenticate against more than one LDAP server, simply increment the index and specify the settings for the next LDAP server.

Note: Failure to specify adequate properties such as type, ldapUrl, etc will simply deactivate LDAP authentication altogether silently.

Note: Attributes retrieved as part of LDAP authentication are merged with all attributes retrieved from other attribute repository sources, if any. Attributes retrieved directly as part of LDAP authentication trump all other attributes.

To learn more about this topic, please review this guide.

The following authentication types are supported:

Connection Strategies

If multiple URLs are provided as the ldapURL this describes how each URL will be processed.

Connection Initialization

LDAP connection configuration injected into the LDAP connection pool can be initialized with the following parameters:

Validators

The following LDAP validators can be used to test connection health status:

Passivators

The following options can be used to passivate bjects when they are checked back into the LDAP connection pool:

Why Passivators?

You may receive unexpected LDAP failures, when CAS is configured to authenticate using DIRECT or AUTHENTICATED types and LDAP is locked down to not allow anonymous binds/searches. Every second attempt with a given LDAP connection from the pool would fail if it was on the same connection as a failed login attempt, and the regular connection validator would similarly fail. When a connection is returned back to a pool, it still may contain the principal and credentials from the previous attempt. Before the next bind attempt using that connection, the validator tries to validate the connection again but fails because it's no longer trying with the configured bind credentials but with whatever user DN was used in the previous step. Given the validation failure, the connection is closed and CAS would deny access by default. Passivators attempt to reconnect to LDAP with the configured bind credentials, effectively resetting the connection to what it should be after each bind request.

# cas.authn.ldap[0].type=AD|AUTHENTICATED|DIRECT|ANONYMOUS

# cas.authn.ldap[0].ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.authn.ldap[0].connectionStrategy=
# cas.authn.ldap[0].useSsl=true
# cas.authn.ldap[0].useStartTls=false
# cas.authn.ldap[0].connectTimeout=5000
# cas.authn.ldap[0].baseDn=dc=example,dc=org
# cas.authn.ldap[0].userFilter=cn={user}
# cas.authn.ldap[0].subtreeSearch=true
# cas.authn.ldap[0].usePasswordPolicy=true
# cas.authn.ldap[0].bindDn=cn=Directory Manager,dc=example,dc=org
# cas.authn.ldap[0].bindCredential=Password

# cas.authn.ldap[0].enhanceWithEntryResolver=true
# cas.authn.ldap[0].dnFormat=uid=%s,ou=people,dc=example,dc=org
# cas.authn.ldap[0].principalAttributeId=uid
# cas.authn.ldap[0].principalAttributePassword=password
# cas.authn.ldap[0].principalAttributeList=sn,cn:commonName,givenName,eduPersonTargettedId:SOME_IDENTIFIER

# cas.authn.ldap[0].collectDnAttribute=false
# cas.authn.ldap[0].principalDnAttributeName=principalLdapDn
# cas.authn.ldap[0].allowMultiplePrincipalAttributeValues=true
# cas.authn.ldap[0].allowMissingPrincipalAttributeValue=true
# cas.authn.ldap[0].credentialCriteria=

# cas.authn.ldap[0].saslMechanism=GSSAPI|DIGEST_MD5|CRAM_MD5|EXTERNAL
# cas.authn.ldap[0].saslRealm=EXAMPLE.COM
# cas.authn.ldap[0].saslAuthorizationId=
# cas.authn.ldap[0].saslMutualAuth=
# cas.authn.ldap[0].saslQualityOfProtection=
# cas.authn.ldap[0].saslSecurityStrength=

# cas.authn.ldap[0].trustCertificates=
# cas.authn.ldap[0].keystore=
# cas.authn.ldap[0].keystorePassword=
# cas.authn.ldap[0].keystoreType=JKS|JCEKS|PKCS12

# cas.authn.ldap[0].poolPassivator=NONE|CLOSE|BIND
# cas.authn.ldap[0].minPoolSize=3
# cas.authn.ldap[0].maxPoolSize=10
# cas.authn.ldap[0].validateOnCheckout=true
# cas.authn.ldap[0].validatePeriodically=true
# cas.authn.ldap[0].validatePeriod=600
# cas.authn.ldap[0].validateTimeout=5000

# cas.authn.ldap[0].failFast=true
# cas.authn.ldap[0].idleTime=5000
# cas.authn.ldap[0].prunePeriod=5000
# cas.authn.ldap[0].blockWaitTime=5000

# cas.authn.ldap[0].providerClass=org.ldaptive.provider.unboundid.UnboundIDProvider
# cas.authn.ldap[0].allowMultipleDns=false

# cas.authn.ldap[0].searchEntryHandlers[0].type=CASE_CHANGE|DN_ATTRIBUTE_ENTRY|MERGE| \
#                                               OBJECT_GUID|OBJECT_SID|PRIMARY_GROUP| \
#                                               RANGE_ENTRY|RECURSIVE_ENTRY

# cas.authn.ldap[0].searchEntryHandlers[0].caseChange.dnCaseChange=NONE|LOWER|UPPER
# cas.authn.ldap[0].searchEntryHandlers[0].caseChange.attributeNameCaseChange=NONE|LOWER|UPPER
# cas.authn.ldap[0].searchEntryHandlers[0].caseChange.attributeValueCaseChange=NONE|LOWER|UPPER
# cas.authn.ldap[0].searchEntryHandlers[0].caseChange.attributeNames=

# cas.authn.ldap[0].searchEntryHandlers[0].dnAttribute.dnAttributeName=entryDN
# cas.authn.ldap[0].searchEntryHandlers[0].dnAttribute.addIfExists=false

# cas.authn.ldap[0].searchEntryHandlers[0].primaryGroupId.groupFilter=(&(objectClass=group)(objectSid={0}))
# cas.authn.ldap[0].searchEntryHandlers[0].primaryGroupId.baseDn=

# cas.authn.ldap[0].searchEntryHandlers[0].mergeAttribute.mergeAttributeName=
# cas.authn.ldap[0].searchEntryHandlers[0].mergeAttribute.attribueNames=

# cas.authn.ldap[0].searchEntryHandlers[0].recursive.searchAttribute=
# cas.authn.ldap[0].searchEntryHandlers[0].recursive.mergeAttributes=

# cas.authn.ldap[0].name=
# cas.authn.ldap[0].order=0

# cas.authn.ldap[0].passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.ldap[0].passwordEncoder.characterEncoding=
# cas.authn.ldap[0].passwordEncoder.encodingAlgorithm=
# cas.authn.ldap[0].passwordEncoder.secret=
# cas.authn.ldap[0].passwordEncoder.strength=16

# cas.authn.ldap[0].principalTransformation.suffix=
# cas.authn.ldap[0].principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.ldap[0].principalTransformation.prefix=

# cas.authn.ldap[0].validator.type=NONE|SEARCH|COMPARE
# cas.authn.ldap[0].validator.baseDn=
# cas.authn.ldap[0].validator.searchFilter=(objectClass=*)
# cas.authn.ldap[0].validator.scope=OBJECT|ONELEVEL|SUBTREE
# cas.authn.ldap[0].validator.attributeName=objectClass
# cas.authn.ldap[0].validator.attributeValues=top
# cas.authn.ldap[0].validator.dn=

# cas.authn.ldap[0].passwordPolicy.type=GENERIC|AD|FreeIPA|EDirectory
# cas.authn.ldap[0].passwordPolicy.enabled=true
# cas.authn.ldap[0].passwordPolicy.policyAttributes.accountLocked=javax.security.auth.login.AccountLockedException
# cas.authn.ldap[0].passwordPolicy.loginFailures=5
# cas.authn.ldap[0].passwordPolicy.warningAttributeValue=
# cas.authn.ldap[0].passwordPolicy.warningAttributeName=
# cas.authn.ldap[0].passwordPolicy.displayWarningOnMatch=true
# cas.authn.ldap[0].passwordPolicy.warnAll=true
# cas.authn.ldap[0].passwordPolicy.warningDays=30

REST Authentication

This allows the CAS server to reach to a remote REST endpoint via a POST. To learn more about this topic, please review this guide.

# cas.authn.rest.uri=https://...
# cas.authn.rest.name=

# cas.authn.rest.passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.rest.passwordEncoder.characterEncoding=
# cas.authn.rest.passwordEncoder.encodingAlgorithm=
# cas.authn.rest.passwordEncoder.secret=
# cas.authn.rest.passwordEncoder.strength=16

Google Apps Authentication

Authenticate via CAS into Google Apps services and applications. To learn more about this topic, please review this guide.

# cas.googleApps.publicKeyLocation=file:/etc/cas/public.key
# cas.googleApps.keyAlgorithm=RSA
# cas.googleApps.privateKeyLocation=file:/etc/cas/private.key

OpenID Authentication

Allow CAS to become an OpenID authentication provider. To learn more about this topic, please review this guide.

# cas.authn.openid.enforceRpId=false
# cas.authn.openid.principal.principalAttribute=
# cas.authn.openid.principal.returnNull=false
# cas.authn.openid.name=

SPNEGO Authentication

To learn more about this topic, please review this guide.

# cas.authn.spnego.kerberosConf=
# cas.authn.spnego.mixedModeAuthentication=false
# cas.authn.spnego.cachePolicy=600
# cas.authn.spnego.timeout=300000
# cas.authn.spnego.jcifsServicePrincipal=HTTP/[email protected]
# cas.authn.spnego.jcifsNetbiosWins=
# cas.authn.spnego.loginConf=
# cas.authn.spnego.ntlmAllowed=true
# cas.authn.spnego.hostNamePatternString=.+
# cas.authn.spnego.jcifsUsername=
# cas.authn.spnego.useSubjectCredsOnly=false
# cas.authn.spnego.supportedBrowsers=MSIE,Trident,Firefox,AppleWebKit
# cas.authn.spnego.jcifsDomainController=
# cas.authn.spnego.dnsTimeout=2000
# cas.authn.spnego.hostNameClientActionStrategy=hostnameSpnegoClientAction
# cas.authn.spnego.kerberosKdc=172.10.1.10
# cas.authn.spnego.alternativeRemoteHostAttribute=alternateRemoteHeader
# cas.authn.spnego.jcifsDomain=
# cas.authn.spnego.ipsToCheckPattern=127.+
# cas.authn.spnego.kerberosDebug=
# cas.authn.spnego.send401OnAuthenticationFailure=true
# cas.authn.spnego.kerberosRealm=EXAMPLE.COM
# cas.authn.spnego.ntlm=false
# cas.authn.spnego.principalWithDomainName=false
# cas.authn.spnego.jcifsServicePassword=
# cas.authn.spnego.jcifsPassword=
# cas.authn.spnego.spnegoAttributeName=distinguishedName
# cas.authn.spnego.name=

# cas.authn.spnego.principal.principalAttribute=
# cas.authn.spnego.principal.returnNull=false

# cas.authn.spnego.ldap.ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.authn.spnego.ldap.connectionStrategy=
# cas.authn.spnego.ldap.baseDn=dc=example,dc=org
# cas.authn.spnego.ldap.bindDn=cn=Directory Manager,dc=example,dc=org
# cas.authn.spnego.ldap.bindCredential=Password
# cas.authn.spnego.ldap.providerClass=org.ldaptive.provider.unboundid.UnboundIDProvider
# cas.authn.spnego.ldap.connectTimeout=5000
# cas.authn.spnego.ldap.trustCertificates=
# cas.authn.spnego.ldap.keystore=
# cas.authn.spnego.ldap.keystorePassword=
# cas.authn.spnego.ldap.keystoreType=JKS|JCEKS|PKCS12
# cas.authn.spnego.ldap.poolPassivator=NONE|CLOSE|BIND
# cas.authn.spnego.ldap.minPoolSize=3
# cas.authn.spnego.ldap.maxPoolSize=10
# cas.authn.spnego.ldap.validateOnCheckout=true
# cas.authn.spnego.ldap.validatePeriodically=true
# cas.authn.spnego.ldap.validatePeriod=600
# cas.authn.spnego.ldap.validateTimeout=5000
# cas.authn.spnego.ldap.failFast=true
# cas.authn.spnego.ldap.idleTime=500
# cas.authn.spnego.ldap.prunePeriod=600
# cas.authn.spnego.ldap.blockWaitTime=5000
# cas.authn.spnego.ldap.subtreeSearch=true
# cas.authn.spnego.ldap.useSsl=true
# cas.authn.spnego.ldap.useStartTls=false
# cas.authn.spnego.ldap.searchFilter=host={host}

# cas.authn.spnego.ldap.validator.type=NONE|SEARCH|COMPARE
# cas.authn.spnego.ldap.validator.searchFilter=(objectClass=*)
# cas.authn.spnego.ldap.validator.scope=OBJECT|ONELEVEL|SUBTREE
# cas.authn.spnego.ldap.validator.attributeName=objectClass
# cas.authn.spnego.ldap.validator.attributeValues=top
# cas.authn.spnego.ldap.validator.dn=

NTLM Authentication

# cas.authn.ntlm.includePattern=
# cas.authn.ntlm.loadBalance=true
# cas.authn.ntlm.domainController=
# cas.authn.ntlm.name=

JAAS Authentication

To learn more about this topic, please review this guide.

# cas.authn.jaas[0].realm=CAS
# cas.authn.jaas[0].kerberosKdcSystemProperty=
# cas.authn.jaas[0].kerberosRealmSystemProperty=
# cas.authn.jaas[0].name=
# cas.authn.jaas[0].credentialCriteria=

# cas.authn.jaas[0].passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.jaas[0].passwordEncoder.characterEncoding=
# cas.authn.jaas[0].passwordEncoder.encodingAlgorithm=
# cas.authn.jaas[0].passwordEncoder.secret=
# cas.authn.jaas[0].passwordEncoder.strength=16

# cas.authn.jaas[0].principalTransformation.suffix=
# cas.authn.jaas[0].principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.jaas[0].principalTransformation.prefix=

GUA Authentication

To learn more about this topic, please review this guide.

LDAP Repository

# cas.authn.gua.ldap.imageAttribute=userImageIdentifier
# cas.authn.gua.ldap.ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.authn.gua.ldap.connectionStrategy=
# cas.authn.gua.ldap.baseDn=dc=example,dc=org
# cas.authn.gua.ldap.userFilter=cn={user}
# cas.authn.gua.ldap.bindDn=cn=Directory Manager,dc=example,dc=org
# cas.authn.gua.ldap.bindCredential=Password
# cas.authn.gua.ldap.providerClass=org.ldaptive.provider.unboundid.UnboundIDProvider
# cas.authn.gua.ldap.connectTimeout=5000
# cas.authn.gua.ldap.trustCertificates=
# cas.authn.gua.ldap.keystore=
# cas.authn.gua.ldap.keystorePassword=
# cas.authn.gua.ldap.keystoreType=JKS|JCEKS|PKCS12
# cas.authn.gua.ldap.poolPassivator=NONE|CLOSE|BIND
# cas.authn.gua.ldap.minPoolSize=3
# cas.authn.gua.ldap.maxPoolSize=10
# cas.authn.gua.ldap.validateOnCheckout=true
# cas.authn.gua.ldap.validatePeriodically=true
# cas.authn.gua.ldap.validatePeriod=600
# cas.authn.gua.ldap.validateTimeout=5000
# cas.authn.gua.ldap.failFast=true
# cas.authn.gua.ldap.idleTime=500
# cas.authn.gua.ldap.prunePeriod=600
# cas.authn.gua.ldap.blockWaitTime=5000
# cas.authn.gua.ldap.useSsl=true
# cas.authn.gua.ldap.useStartTls=false

# cas.authn.gua.ldap.validator.type=NONE|SEARCH|COMPARE
# cas.authn.gua.ldap.validator.baseDn=
# cas.authn.gua.ldap.validator.searchFilter=(objectClass=*)
# cas.authn.gua.ldap.validator.scope=OBJECT|ONELEVEL|SUBTREE
# cas.authn.gua.ldap.validator.attributeName=objectClass
# cas.authn.gua.ldap.validator.attributeValues=top
# cas.authn.gua.ldap.validator.dn=

Static Resource Repository

# cas.authn.gua.resource.location=file:/path/to/image.jpg

JWT/Token Authentication

To learn more about this topic, please review this guide.

# cas.authn.token.name=

# cas.authn.token.principalTransformation.suffix=
# cas.authn.token.principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.token.principalTransformation.prefix=

JWT Service Tickets

# cas.authn.token.crypto.signing.key=
# cas.authn.token.crypto.signing.keySize=512
# cas.authn.token.crypto.encryption.key=
# cas.authn.token.crypto.encryption.keySize=256
# cas.authn.token.crypto.alg=AES

The encryption key must be randomly-generated string whose length is defined by the encryption key size setting. The signing key is a JWK whose length is defined by the signing key size setting.

Stormpath Authentication

To learn more about this topic, please review this guide.

# cas.authn.stormpath.apiKey=
# cas.authn.stormpath.secretkey=
# cas.authn.stormpath.applicationId=
# cas.authn.stormpath.name=

# cas.authn.stormpath.principalTransformation.suffix=
# cas.authn.stormpath.principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.stormpath.principalTransformation.prefix=

Remote Address Authentication

To learn more about this topic, please review this guide.

# cas.authn.remoteAddress.ipAddressRange=
# cas.authn.remoteAddress.name=

Accept Users Authentication

# cas.authn.accept.users=
# cas.authn.accept.name=

# cas.authn.accept.passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2
# cas.authn.accept.passwordEncoder.characterEncoding=
# cas.authn.accept.passwordEncoder.encodingAlgorithm=
# cas.authn.accept.passwordEncoder.secret=
# cas.authn.accept.passwordEncoder.strength=16

# cas.authn.accept.principalTransformation.suffix=
# cas.authn.accept.principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.accept.principalTransformation.prefix=

X509 Authentication

To learn more about this topic, please review this guide.

Principal Resolution

X.509 principal resolution can act on the following principal types:

CRL Fetching / Revocation

CAS provides a flexible policy engine for certificate revocation checking. This facility arose due to lack of configurability in the revocation machinery built into the JSSE.

Available policies cover the following events:

• CRL Expiration
• CRL Unavailability

In either event, the following options are available:

Revocation certificate checking can be carried out in one of the following ways:

To fetch CRLs, the following options are available:

# cas.authn.x509.crlExpiredPolicy=DENY|ALLOW|THRESHOLD
# cas.authn.x509.crlUnavailablePolicy=DENY|ALLOW|THRESHOLD
# cas.authn.x509.crlResourceExpiredPolicy=DENY|ALLOW|THRESHOLD
# cas.authn.x509.crlResourceUnavailablePolicy=DENY|ALLOW|THRESHOLD

# cas.authn.x509.revocationChecker=NONE|CRL|RESOURCE
# cas.authn.x509.crlFetcher=RESOURCE|LDAP

# cas.authn.x509.crlResources[0]=file:/...

# cas.authn.x509.cacheMaxElementsInMemory=1000
# cas.authn.x509.cacheDiskOverflow=false
# cas.authn.x509.cacheEternal=false
# cas.authn.x509.cacheTimeToLiveSeconds=7200
# cas.authn.x509.cacheTimeToIdleSeconds=1800

# cas.authn.x509.checkKeyUsage=false
# cas.authn.x509.revocationPolicyThreshold=172800

# cas.authn.x509.regExSubjectDnPattern=.+
# cas.authn.x509.regExTrustedIssuerDnPattern=.+
# cas.authn.x509.trustedIssuerDnPattern=.+

# cas.authn.x509.name=
# cas.authn.x509.principalDescriptor=
# cas.authn.x509.principalSNRadix=10
# cas.authn.x509.principalHexSNZeroPadding=false
# cas.authn.x509.maxPathLength=1
# cas.authn.x509.throwOnFetchFailure=false
# cas.authn.x509.valueDelimiter=,
# cas.authn.x509.checkAll=false
# cas.authn.x509.requireKeyUsage=false
# cas.authn.x509.serialNumberPrefix=SERIALNUMBER=
# cas.authn.x509.refreshIntervalSeconds=3600
# cas.authn.x509.maxPathLengthAllowUnspecified=false
# cas.authn.x509.certificateAttribute=certificateRevocationList

# cas.authn.x509.ldap.ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.authn.x509.ldap.connectionStrategy=
# cas.authn.x509.ldap.useSsl=true
# cas.authn.x509.ldap.useStartTls=false
# cas.authn.x509.ldap.connectTimeout=5000
# cas.authn.x509.ldap.baseDn=dc=example,dc=org
# cas.authn.x509.ldap.searchFilter=cn={user}
# cas.authn.x509.ldap.subtreeSearch=true
# cas.authn.x509.ldap.bindDn=cn=Directory Manager,dc=example,dc=org
# cas.authn.x509.ldap.bindCredential=Password
# cas.authn.x509.ldap.trustCertificates=
# cas.authn.x509.ldap.keystore=
# cas.authn.x509.ldap.keystorePassword=
# cas.authn.x509.ldap.keystoreType=JKS|JCEKS|PKCS12
# cas.authn.x509.ldap.poolPassivator=NONE|CLOSE|BIND
# cas.authn.x509.ldap.minPoolSize=3
# cas.authn.x509.ldap.maxPoolSize=10
# cas.authn.x509.ldap.validateOnCheckout=true
# cas.authn.x509.ldap.validatePeriodically=true
# cas.authn.x509.ldap.validatePeriod=600
# cas.authn.x509.ldap.validateTimeout=5000
# cas.authn.x509.ldap.failFast=true
# cas.authn.x509.ldap.idleTime=500
# cas.authn.x509.ldap.prunePeriod=600
# cas.authn.x509.ldap.blockWaitTime=5000
# cas.authn.x509.ldap.providerClass=org.ldaptive.provider.unboundid.UnboundIDProvider

# cas.authn.x509.ldap.validator.type=NONE|SEARCH|COMPARE
# cas.authn.x509.ldap.validator.baseDn=
# cas.authn.x509.ldap.validator.searchFilter=(objectClass=*)
# cas.authn.x509.ldap.validator.scope=OBJECT|ONELEVEL|SUBTREE
# cas.authn.x509.ldap.validator.attributeName=objectClass
# cas.authn.x509.ldap.validator.attributeValues=top
# cas.authn.x509.ldap.validator.dn=

# cas.authn.x509.principal.principalAttribute=
# cas.authn.x509.principal.returnNull=false
# cas.authn.x509.principalType=SERIAL_NO|SERIAL_NO_DN|SUBJECT|SUBJECT_ALT_NAME|SUBJECT_DN

Shiro Authentication

To learn more about this topic, please review this guide.

# cas.authn.shiro.requiredPermissions=value1,value2,...
# cas.authn.shiro.requiredRoles=value1,value2,...
# cas.authn.shiro.config.location=classpath:shiro.ini
# cas.authn.shiro.name=

# cas.authn.shiro.passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.shiro.passwordEncoder.characterEncoding=
# cas.authn.shiro.passwordEncoder.encodingAlgorithm=
# cas.authn.shiro.passwordEncoder.secret=
# cas.authn.shiro.passwordEncoder.strength=16

# cas.authn.shiro.principalTransformation.suffix=
# cas.authn.shiro.principalTransformation.caseConversion=NONE|UPPERCASE|LOWERCASE
# cas.authn.shiro.principalTransformation.prefix=

Trusted Authentication

To learn more about this topic, please review this guide.

# cas.authn.trusted.principalAttribute=
# cas.authn.trusted.returnNull=false
# cas.authn.trusted.name=

WS-Fed Delegated Authentication

To learn more about this topic, please review this guide.

Attribute Types

In order to construct the final authenticated principal, CAS may be configured to use the following strategies when collecting principal attributes:

# cas.authn.wsfed.identityProviderUrl=https://adfs.example.org/adfs/ls/
# cas.authn.wsfed.identityProviderIdentifier=https://adfs.example.org/adfs/services/trust
# cas.authn.wsfed.relyingPartyIdentifier=urn:cas:localhost
# cas.authn.wsfed.attributesType=WSFED
# cas.authn.wsfed.signingCertificateResources=classpath:adfs-signing.crt
# cas.authn.wsfed.tolerance=10000
# cas.authn.wsfed.identityAttribute=upn
# cas.authn.wsfed.attributeResolverEnabled=true
# cas.authn.wsfed.autoRedirect=true
# cas.authn.wsfed.name=

# cas.authn.wsfed.principal.principalAttribute=
# cas.authn.wsfed.principal.returnNull=false

# Private/Public keypair used to decrypt assertions, if any.
# cas.authn.wsfed.encryptionPrivateKey=classpath:private.key
# cas.authn.wsfed.encryptionCertificate=classpath:certificate.crt
# cas.authn.wsfed.encryptionPrivateKeyPassword=NONE

Multifactor Authentication

To learn more about this topic, please review this guide.

# Activate MFA globally for all, regardless of other settings
# cas.authn.mfa.globalProviderId=mfa-duo

# Activate MFA globally based on authentication metadata attributes
# cas.authn.mfa.globalAuthenticationAttributeNameTriggers=memberOf,eduPersonPrimaryAffiliation
# cas.authn.mfa.globalAuthenticationAttributeValueRegex=faculty|staff

# Activate MFA globally based on principal attributes
# cas.authn.mfa.globalPrincipalAttributeNameTriggers=memberOf,eduPersonPrimaryAffiliation

# Specify the regular expression pattern to trigger multifactor when working with a single provider.
# Comment out the setting when working with multiple multifactor providers
# cas.authn.mfa.globalPrincipalAttributeValueRegex=faculty|staff

# Activate MFA globally based on principal attributes and a groovy-based predicate
# cas.authn.mfa.globalPrincipalAttributePredicate=file:/etc/cas/PredicateExample.groovy

# Activate MFA based on a custom REST API/endpoint
# cas.authn.mfa.restEndpoint=https://entity.example.org/mfa

# Activate MFA based on a Groovy script
# cas.authn.mfa.groovyScript=file:/etc/cas/mfaGroovyTrigger.groovy

# Activate MFA based on Internet2's Grouper
# cas.authn.mfa.grouperGroupField=NAME|EXTENSION|DISPLAY_NAME|DISPLAY_EXTENSION

# Activate MFA based on an optional request parameter
# cas.authn.mfa.requestParameter=authn_method

# Describe the global failure mode in case provider cannot be reached
# cas.authn.mfa.globalFailureMode=CLOSED

# Design the attribute chosen to communicate the authentication context
# cas.authn.mfa.authenticationContextAttribute=authnContextClass

# Identify the request content type for non-browser MFA requests
# cas.authn.mfa.contentType=application/cas

# Select MFA provider, if resolved more than one, via Groovy script
# cas.authn.mfa.providerSelectorGroovyScript=file:/etc/cas/mfaGroovySelector.groovy

Multifactor Trusted Device/Browser

To learn more about this topic, please review this guide.

# cas.authn.mfa.trusted.authenticationContextAttribute=isFromTrustedMultifactorAuthentication
# cas.authn.mfa.trusted.deviceRegistrationEnabled=true
# cas.authn.mfa.trusted.expiration=30
# cas.authn.mfa.trusted.timeUnit=SECONDS|MINUTES|HOURS|DAYS

# cas.authn.mfa.trusted.encryptionKey=
# cas.authn.mfa.trusted.signingKey=
# cas.authn.mfa.trusted.cipherEnabled=true

Signing & Encryption

The signing and encryption keys are both JWKs of size 512 and 256. The encryption algorithm is set to AES_128_CBC_HMAC_SHA_256.

JDBC Storage

# cas.authn.mfa.trusted.jpa.healthQuery=
# cas.authn.mfa.trusted.jpa.isolateInternalQueries=false
# cas.authn.mfa.trusted.jpa.url=jdbc:hsqldb:mem:cas-jdbc-storage
# cas.authn.mfa.trusted.jpa.failFast=true
# cas.authn.mfa.trusted.jpa.dialect=org.hibernate.dialect.HSQLDialect
# cas.authn.mfa.trusted.jpa.leakThreshold=10
# cas.authn.mfa.trusted.jpa.batchSize=1
# cas.authn.mfa.trusted.jpa.defaultCatalog=
# cas.authn.mfa.trusted.jpa.defaultSchema=
# cas.authn.mfa.trusted.jpa.user=sa
# cas.authn.mfa.trusted.jpa.ddlAuto=create-drop
# cas.authn.mfa.trusted.jpa.password=
# cas.authn.mfa.trusted.jpa.autocommit=false
# cas.authn.mfa.trusted.jpa.driverClass=org.hsqldb.jdbcDriver
# cas.authn.mfa.trusted.jpa.idleTimeout=5000
# cas.authn.mfa.trusted.jpa.dataSourceName=
# cas.authn.mfa.trusted.jpa.dataSourceProxy=false

# cas.authn.mfa.trusted.jpa.pool.suspension=false
# cas.authn.mfa.trusted.jpa.pool.minSize=6
# cas.authn.mfa.trusted.jpa.pool.maxSize=18
# cas.authn.mfa.trusted.jpa.pool.maxWait=2000

MongoDb Storage

# cas.authn.mfa.trusted.mongodb.clientUri=
# cas.authn.mfa.trusted.mongodb.dropCollection=false
# cas.authn.mfa.trusted.mongodb.collection=MongoDbCasTrustedAuthnMfaRepository

REST Storage

# cas.authn.mfa.trusted.rest.endpoint=https://api.example.org/trustedBrowser

Cleaner

A cleaner process is scheduled to run in the background to clean up expired and stale tickets. This section controls how that process should behave.

# cas.authn.mfa.trusted.cleaner.startDelay=10000
# cas.authn.mfa.trusted.cleaner.repeatInterval=60000
# cas.authn.mfa.trusted.cleaner.enabled=true

Google Authenticator

To learn more about this topic, please review this guide.

# cas.authn.mfa.gauth.windowSize=3
# cas.authn.mfa.gauth.issuer=
# cas.authn.mfa.gauth.codeDigits=6
# cas.authn.mfa.gauth.label=
# cas.authn.mfa.gauth.timeStepSize=30
# cas.authn.mfa.gauth.rank=0
# cas.authn.mfa.gauth.trustedDeviceEnabled=true
# cas.authn.mfa.gauth.name=

# cas.authn.mfa.gauth.cleaner.enabled=true
# cas.authn.mfa.gauth.cleaner.startDelay=20000
# cas.authn.mfa.gauth.cleaner.repeatInterval=60000

# cas.authn.mfa.gauth.bypass.principalAttributeName=bypass|skip
# cas.authn.mfa.gauth.bypass.principalAttributeValue=true|enabled.+
# cas.authn.mfa.gauth.bypass.authenticationAttributeName=bypass|skip
# cas.authn.mfa.gauth.bypass.authenticationAttributeValue=allowed.+|enabled.+
# cas.authn.mfa.gauth.bypass.authenticationHandlerName=AcceptUsers.+
# cas.authn.mfa.gauth.bypass.authenticationMethodName=LdapAuthentication.+
# cas.authn.mfa.gauth.bypass.credentialClassType=UsernamePassword.+

Google Authenticator JSON

# cas.authn.mfa.gauth.json.config.location=file:/somewhere.json

Google Authenticator Rest

# cas.authn.mfa.gauth.rest.endpointUrl=https://somewhere.gauth.com

Google Authenticator MongoDb

# cas.authn.mfa.gauth.mongodb.clientUri=
# cas.authn.mfa.gauth.mongodb.dropCollection=false
# cas.authn.mfa.gauth.mongodb.collection=MongoDbGoogleAuthenticatorRepository
# cas.authn.mfa.gauth.mongodb.tokenCollection=MongoDbGoogleAuthenticatorTokenRepository

Google Authenticator JPA

# cas.authn.mfa.gauth.jpa.database.healthQuery=
# cas.authn.mfa.gauth.jpa.database.isolateInternalQueries=false
# cas.authn.mfa.gauth.jpa.database.url=jdbc:hsqldb:mem:cas-gauth
# cas.authn.mfa.gauth.jpa.database.failFast=true
# cas.authn.mfa.gauth.jpa.database.dialect=org.hibernate.dialect.HSQLDialect
# cas.authn.mfa.gauth.jpa.database.leakThreshold=10
# cas.authn.mfa.gauth.jpa.database.batchSize=1
# cas.authn.mfa.gauth.jpa.database.user=sa
# cas.authn.mfa.gauth.jpa.database.ddlAuto=create-drop
# cas.authn.mfa.gauth.jpa.database.password=
# cas.authn.mfa.gauth.jpa.database.autocommit=false
# cas.authn.mfa.gauth.jpa.database.driverClass=org.hsqldb.jdbcDriver
# cas.authn.mfa.gauth.jpa.database.idleTimeout=5000
# cas.authn.mfa.gauth.jpa.database.dataSourceName=
# cas.authn.mfa.gauth.jpa.database.dataSourceProxy=false

# cas.authn.mfa.gauth.jpa.database.pool.suspension=false
# cas.authn.mfa.gauth.jpa.database.pool.minSize=6
# cas.authn.mfa.gauth.jpa.database.pool.maxSize=18
# cas.authn.mfa.gauth.jpa.database.pool.maxWait=2000

YubiKey

To learn more about this topic, please review this guide.

# cas.authn.mfa.yubikey.clientId=
# cas.authn.mfa.yubikey.secretKey=
# cas.authn.mfa.yubikey.rank=0
# cas.authn.mfa.yubikey.apiUrls=
# cas.authn.mfa.yubikey.trustedDeviceEnabled=true
# cas.authn.mfa.yubikey.name=

# cas.authn.mfa.yubikey.bypass.principalAttributeName=bypass|skip
# cas.authn.mfa.yubikey.bypass.principalAttributeValue=true|enabled.+
# cas.authn.mfa.yubikey.bypass.authenticationAttributeName=bypass|skip
# cas.authn.mfa.yubikey.bypass.authenticationAttributeValue=allowed.+|enabled.+
# cas.authn.mfa.yubikey.bypass.authenticationHandlerName=AcceptUsers.+
# cas.authn.mfa.yubikey.bypass.authenticationMethodName=LdapAuthentication.+
# cas.authn.mfa.yubikey.bypass.credentialClassType=UsernamePassword.+

Radius OTP

To learn more about this topic, please review this guide.

# cas.authn.mfa.radius.failoverOnAuthenticationFailure=false
# cas.authn.mfa.radius.failoverOnException=false
# cas.authn.mfa.radius.rank=0
# cas.authn.mfa.radius.trustedDeviceEnabled=true
# cas.authn.mfa.radius.name=

# cas.authn.mfa.radius.client.socketTimeout=0
# cas.authn.mfa.radius.client.sharedSecret=N0Sh@ar3d$ecReT
# cas.authn.mfa.radius.client.authenticationPort=1812
# cas.authn.mfa.radius.client.accountingPort=1813
# cas.authn.mfa.radius.client.inetAddress=localhost

# cas.authn.mfa.radius.server.retries=3
# cas.authn.mfa.radius.server.nasPortType=-1
# cas.authn.mfa.radius.server.protocol=EAP_MSCHAPv2
# cas.authn.mfa.radius.server.nasRealPort=-1
# cas.authn.mfa.radius.server.nasPortId=-1
# cas.authn.mfa.radius.server.nasIdentifier=-1
# cas.authn.mfa.radius.server.nasPort=-1
# cas.authn.mfa.radius.server.nasIpAddress=
# cas.authn.mfa.radius.server.nasIpv6Address=

# cas.authn.mfa.radius.bypass.principalAttributeName=bypass|skip
# cas.authn.mfa.radius.bypass.principalAttributeValue=true|enabled.+
# cas.authn.mfa.radius.bypass.authenticationAttributeName=bypass|skip
# cas.authn.mfa.radius.bypass.authenticationAttributeValue=allowed.+|enabled.+
# cas.authn.mfa.radius.bypass.authenticationHandlerName=AcceptUsers.+
# cas.authn.mfa.radius.bypass.authenticationMethodName=LdapAuthentication.+
# cas.authn.mfa.radius.bypass.credentialClassType=UsernamePassword.+

DuoSecurity

To learn more about this topic, please review this guide.

# cas.authn.mfa.duo[0].duoSecretKey=
# cas.authn.mfa.duo[0].rank=0
# cas.authn.mfa.duo[0].duoApplicationKey=
# cas.authn.mfa.duo[0].duoIntegrationKey=
# cas.authn.mfa.duo[0].duoApiHost=
# cas.authn.mfa.duo[0].trustedDeviceEnabled=true
# cas.authn.mfa.duo[0].id=mfa-duo
# cas.authn.mfa.duo[0].name=

# cas.authn.mfa.duo[0].bypass.principalAttributeName=bypass|skip
# cas.authn.mfa.duo[0].bypass.principalAttributeValue=true|enabled.+
# cas.authn.mfa.duo[0].bypass.authenticationAttributeName=bypass|skip
# cas.authn.mfa.duo[0].bypass.authenticationAttributeValue=allowed.+|enabled.+
# cas.authn.mfa.duo[0].bypass.authenticationHandlerName=AcceptUsers.+
# cas.authn.mfa.duo[0].bypass.authenticationMethodName=LdapAuthentication.+
# cas.authn.mfa.duo[0].bypass.credentialClassType=UsernamePassword.+

The duoApplicationKey is a string, at least 40 characters long, that you generate and keep secret from Duo. You can generate a random string in Python with:

import os, hashlib
print hashlib.sha1(os.urandom(32)).hexdigest()

FIDO U2F

To learn more about this topic, please review this guide.

# cas.authn.mfa.u2f.rank=0
# cas.authn.mfa.u2f.name=

# cas.authn.mfa.u2f.bypass.principalAttributeName=bypass|skip
# cas.authn.mfa.u2f.bypass.principalAttributeValue=true|enabled.+
# cas.authn.mfa.u2f.bypass.authenticationAttributeName=bypass|skip
# cas.authn.mfa.u2f.bypass.authenticationAttributeValue=allowed.+|enabled.+
# cas.authn.mfa.u2f.bypass.authenticationHandlerName=AcceptUsers.+
# cas.authn.mfa.u2f.bypass.authenticationMethodName=LdapAuthentication.+
# cas.authn.mfa.u2f.bypass.credentialClassType=UsernamePassword.+

FIDO U2F Memory

# cas.authn.mfa.u2f.expireRegistrations=30
# cas.authn.mfa.u2f.expireRegistrationsTimeUnit=SECONDS
# cas.authn.mfa.u2f.expireDevices=30
# cas.authn.mfa.u2f.expireDevicesTimeUnit=DAYS

Microsoft Azure

To learn more about this topic, please review this guide.

# cas.authn.mfa.azure.phoneAttribute=phone
# cas.authn.mfa.azure.configDir=/etc/cas/azure
# cas.authn.mfa.azure.privateKeyPassword=
# cas.authn.mfa.azure.mode=POUND|PIN
# cas.authn.mfa.azure.rank=0
# cas.authn.mfa.azure.name=
# cas.authn.mfa.azure.allowInternationalCalls=false

# cas.authn.mfa.azure.bypass.principalAttributeName=bypass|skip
# cas.authn.mfa.azure.bypass.principalAttributeValue=true|enabled.+
# cas.authn.mfa.azure.bypass.authenticationAttributeName=bypass|skip
# cas.authn.mfa.azure.bypass.authenticationAttributeValue=allowed.+|enabled.+
# cas.authn.mfa.azure.bypass.authenticationHandlerName=AcceptUsers.+
# cas.authn.mfa.azure.bypass.authenticationMethodName=LdapAuthentication.+
# cas.authn.mfa.azure.bypass.credentialClassType=UsernamePassword.+

Authy

To learn more about this topic, please review this guide.

# cas.authn.mfa.authy.apiKey=
# cas.authn.mfa.authy.apiUrl=
# cas.authn.mfa.authy.phoneAttribute=phone
# cas.authn.mfa.authy.mailAttribute=mail
# cas.authn.mfa.authy.countryCode=1
# cas.authn.mfa.authy.forceVerification=true
# cas.authn.mfa.authy.trustedDeviceEnabled=true
# cas.authn.mfa.authy.name=

# cas.authn.mfa.authy.bypass.principalAttributeName=bypass|skip
# cas.authn.mfa.authy.bypass.principalAttributeValue=true|enabled.+
# cas.authn.mfa.authy.bypass.authenticationAttributeName=bypass|skip
# cas.authn.mfa.authy.bypass.authenticationAttributeValue=allowed.+|enabled.+
# cas.authn.mfa.authy.bypass.authenticationHandlerName=AcceptUsers.+
# cas.authn.mfa.authy.bypass.authenticationMethodName=LdapAuthentication.+
# cas.authn.mfa.authy.bypass.credentialClassType=UsernamePassword.+

SAML Core

Control core SAML functionality within CAS.

# cas.samlCore.ticketidSaml2=false
# cas.samlCore.skewAllowance=5
# cas.samlCore.issueLength=30
# cas.samlCore.attributeNamespace=http://www.ja-sig.org/products/cas/
# cas.samlCore.issuer=localhost
# cas.samlCore.securityManager=com.sun.org.apache.xerces.internal.util.SecurityManager

SAML IdP

Allow CAS to become a SAML2 identity provider. To learn more about this topic, please review this guide.

Attributes Name Formats

Name formats for an individual attribute can be mapped to a number of pre-defined formats, or a custom format of your own choosing. A given attribute that is to be encoded in the final SAML response may contain any of the following name formats:

# cas.authn.samlIdp.entityId=https://cas.example.org/idp
# cas.authn.samlIdp.scope=example.org
# cas.authn.samlIdp.authenticationContextClassMappings[0]=urn:oasis:names:tc:SAML:2.0:ac:classes:SomeClassName->mfa-duo

# cas.authn.samlIdp.metadata.cacheExpirationMinutes=30
# cas.authn.samlIdp.metadata.failFast=true
# cas.authn.samlIdp.metadata.location=file:/etc/cas/saml
# cas.authn.samlIdp.metadata.privateKeyAlgName=RSA
# cas.authn.samlIdp.metadata.requireValidMetadata=true

# cas.authn.samlIdp.metadata.basicAuthnUsername=
# cas.authn.samlIdp.metadata.basicAuthnPassword=
# cas.authn.samlIdp.metadata.supportedContentTypes=

# cas.authn.samlIdp.logout.forceSignedLogoutRequests=true
# cas.authn.samlIdp.logout.singleLogoutCallbacksDisabled=false

# cas.authn.samlIdp.response.skewAllowance=0
# cas.authn.samlIdp.response.signError=false
# cas.authn.samlIdp.response.useAttributeFriendlyName=true
# cas.authn.samlIdp.response.attributeNameFormats=attributeName->basic|uri|unspecified|custom-format-etc,...

# cas.authn.samlIdp.algs.overrideSignatureCanonicalizationAlgorithm=
# cas.authn.samlIdp.algs.overrideDataEncryptionAlgorithms=
# cas.authn.samlIdp.algs.overrideKeyEncryptionAlgorithms=
# cas.authn.samlIdp.algs.overrideBlackListedEncryptionAlgorithms=
# cas.authn.samlIdp.algs.overrideWhiteListedAlgorithms=
# cas.authn.samlIdp.algs.overrideSignatureReferenceDigestMethods=
# cas.authn.samlIdp.algs.overrideSignatureAlgorithms=
# cas.authn.samlIdp.algs.overrideBlackListedSignatureSigningAlgorithms=
# cas.authn.samlIdp.algs.overrideWhiteListedSignatureSigningAlgorithms=

SAML SPs

Allow CAS to register and enable a number of built-in SAML service provider integrations. To learn more about this topic, please review this guide.

Dropbox

# cas.samlSP.dropbox.metadata=/etc/cas/saml/dropbox.xml
# cas.samlSP.dropbox.name=Dropbox
# cas.samlSP.dropbox.description=Dropbox Integration
# cas.samlSP.dropbox.nameIdAttribute=mail
# cas.samlSP.dropbox.signatureLocation=

TestShib

# cas.samlSP.testShib.metadata=http://www.testshib.org/metadata/testshib-providers.xml
# cas.samlSP.testShib.name=TestShib
# cas.samlSP.testShib.description=TestShib Integration
# cas.samlSP.testShib.attributes=eduPersonPrincipalName
# cas.samlSP.testShib.signatureLocation=

OpenAthens

# cas.samlSP.openAthens.metadata=/path/to/openAthens-metadata.xml
# cas.samlSP.openAthens.name=openAthens
# cas.samlSP.openAthens.description=openAthens Integration
# cas.samlSP.openAthens.attributes=eduPersonPrincipalName,email

Web Advisor

# cas.samlSP.webAdvisor.metadata=/path/to/webadvisor-metadata.xml
# cas.samlSP.webAdvisor.name=Web Advisor
# cas.samlSP.webAdvisor.description=Web Advisor Integration
# cas.samlSP.webAdvisor.attributes=uid

Adobe Creative Cloud

# cas.samlSP.adobeCloud.metadata=/path/to/adobe-metadata.xml
# cas.samlSP.adobeCloud.name=Adobe Creative Cloud
# cas.samlSP.adobeCloud.description=Adobe Creative Cloud Integration
# cas.samlSP.adobeCloud.attributes=Email,FirstName,LastName

Securing The Human

# cas.samlSP.sansSth.metadata=/path/to/sth-metadata.xml
# cas.samlSP.sansSth.name=Securing The Human
# cas.samlSP.sansSth.description=Securing The Human Integration
# cas.samlSP.sansSth.attributes=email,firstName,lastName,scopedUserId,department,reference

Easy IEP

# cas.samlSP.easyIep.metadata=/path/to/easyiep-metadata.xml
# cas.samlSP.easyIep.name=Easy IEP
# cas.samlSP.easyIep.description=Easy IEP Integration
# cas.samlSP.easyIep.attributes=employeeId

Infinite Campus

# cas.samlSP.infiniteCampus.metadata=/path/to/infinitecampus-metadata.xml
# cas.samlSP.infiniteCampus.name=Infinite Campus
# cas.samlSP.infiniteCampus.description=Infinite Campus Integration
# cas.samlSP.infiniteCampus.attributes=employeeId

Slack

# cas.samlSP.slack.metadata=/path/to/slack-metadata.xml
# cas.samlSP.slack.name=Slack
# cas.samlSP.slack.description=Slack Integration
# cas.samlSP.slack.attributes=User.Email,User.Username,first_name,last_name
# cas.samlSP.slack.nameIdFormat=persistent
# cas.samlSP.slack.nameIdAttribute=employeeId

Zendesk

# cas.samlSP.zendesk.metadata=/path/to/zendesk-metadata.xml
# cas.samlSP.zendesk.name=Zendesk
# cas.samlSP.zendesk.description=Zendesk Integration
# cas.samlSP.zendesk.attributes=organization,tags,phone,role
# cas.samlSP.zendesk.nameIdFormat=emailAddress
# cas.samlSP.zendesk.nameIdAttribute=email

Gartner

# cas.samlSP.gartner.metadata=/path/to/gartner-metadata.xml
# cas.samlSP.gartner.name=Gartner
# cas.samlSP.gartner.description=Gartner Integration
# cas.samlSP.gartner.attributes=urn:oid:2.5.4.42,urn:oid:2.5.4.4,urn:oid:0.9.2342.19200300.100.1.3

Arc GIS

# cas.samlSP.arcGIS.metadata=/path/to/arc-metadata.xml
# cas.samlSP.arcGIS.name=ArcGIS
# cas.samlSP.arcGIS.description=ArcGIS Integration
# cas.samlSP.arcGIS.nameIdAttribute=arcNameId
# cas.samlSP.arcGIS.attributes=mail,givenName,arcNameId
# cas.samlSP.arcGIS.nameIdFormat=unspecified

Benefit Focus

# cas.samlSP.benefitFocus.metadata=/path/to/benefitFocus-metadata.xml
# cas.samlSP.benefitFocus.name=Benefit Focus
# cas.samlSP.benefitFocus.description=Benefit Focus Integration
# cas.samlSP.benefitFocus.nameIdAttribute=benefitFocusUniqueId
# cas.samlSP.benefitFocus.nameIdFormat=unspecified

Office365

# cas.samlSP.office365.metadata=/etc/cas/saml/azure.xml
# cas.samlSP.office365.name=O365
# cas.samlSP.office365.description=Office365 Integration
# cas.samlSP.office365.nameIdAttribute=scopedImmutableID
# cas.samlSP.office365.attributes=IDPEmail,ImmutableID
# cas.samlSP.office365.signatureLocation=

SAManage

# cas.samlSP.saManage.metadata=/etc/cas/saml/samanage.xml
# cas.samlSP.saManage.name=SAManage
# cas.samlSP.saManage.description=SAManage Integration
# cas.samlSP.saManage.nameIdAttribute=mail
# cas.samlSP.saManage.signatureLocation=

Workday

# cas.samlSP.workday.metadata=/etc/cas/saml/workday.xml
# cas.samlSP.workday.name=Workday
# cas.samlSP.workday.description=Workday Integration
# cas.samlSP.workday.signatureLocation=

Salesforce

# cas.samlSP.salesforce.metadata=/etc/cas/saml/salesforce.xml
# cas.samlSP.salesforce.name=Salesforce
# cas.samlSP.salesforce.description=Salesforce Integration
# cas.samlSP.salesforce.attributes=mail,eduPersonPrincipalName
# cas.samlSP.salesforce.signatureLocation=

Academic Works

# cas.samlSP.academicWorks.metadata=/etc/cas/saml/aw.xml
# cas.samlSP.academicWorks.name=AcademicWorks
# cas.samlSP.academicWorks.description=AcademicWorks Integration
# cas.samlSP.academicWorks.attributes=mail,displayName

Zoom

# cas.samlSP.zoom.metadata=/etc/cas/saml/zoom.xml
# cas.samlSP.zoom.name=Zoom
# cas.samlSP.zoom.description=Zoom Integration
# cas.samlSP.zoom.attributes=mail,sn,givenName
# cas.samlSP.zoom.nameIdAttribute=mail

Evernote

# cas.samlSP.evernote.metadata=/etc/cas/saml/evernote.xml
# cas.samlSP.evernote.name=Evernote
# cas.samlSP.evernote.description=Evernote Integration
# cas.samlSP.evernote.nameIdAttribute=mail
# cas.samlSP.evernote.nameIdFormat=emailAddress

Tableau

# cas.samlSP.tableau.metadata=/etc/cas/saml/tableau.xml
# cas.samlSP.tableau.name=Tableau
# cas.samlSP.tableau.description=Tableau Integration
# cas.samlSP.tableau.attributes=username

Asana

# cas.samlSP.asana.metadata=/etc/cas/saml/asana.xml
# cas.samlSP.asana.name=Asana
# cas.samlSP.asana.description=Asana Integration
# cas.samlSP.asana.nameIdAttribute=mail
# cas.samlSP.asana.nameIdFormat=emailAddress

Box

# cas.samlSP.box.metadata=/etc/cas/saml/box.xml
# cas.samlSP.box.name=Box
# cas.samlSP.box.description=Box Integration
# cas.samlSP.box.attributes=email,firstName,lastName
# cas.samlSP.box.signatureLocation=

Service Now

# cas.samlSP.serviceNow.metadata=/etc/cas/saml/serviceNow.xml
# cas.samlSP.serviceNow.name=ServiceNow
# cas.samlSP.serviceNow.description=serviceNow Integration
# cas.samlSP.serviceNow.attributes=eduPersonPrincipalName
# cas.samlSP.serviceNow.signatureLocation=

Net Partner

# cas.samlSP.netPartner.metadata=/etc/cas/saml/netPartner.xml
# cas.samlSP.netPartner.name=Net Partner
# cas.samlSP.netPartner.description=Net Partner Integration
# cas.samlSP.netPartner.nameIdAttribute=studentId
# cas.samlSP.netPartner.attributes=
# cas.samlSP.netPartner.signatureLocation=

Webex

# cas.samlSP.webex.metadata=/etc/cas/saml/webex.xml
# cas.samlSP.webex.name=Webex
# cas.samlSP.webex.description=Webex Integration
# cas.samlSP.webex.nameIdAttribute=email
# cas.samlSP.webex.attributes=firstName,lastName

InCommon

Multiple entity ids can be specified to filter the InCommon metadata. EntityIds can be regular expression patterns and are mapped to CAS' serviceId field in the registry. The signature location MUST BE the public key used to sign the metadata.

# cas.samlSP.inCommon.metadata=http://md.incommon.org/InCommon/InCommon-metadata.xml
# cas.samlSP.inCommon.name=InCommon Aggregate
# cas.samlSP.inCommon.description=InCommon Metadata Aggregate
# cas.samlSP.inCommon.attributes=eduPersonPrincipalName,givenName,cn,sn
# cas.samlSP.inCommon.signatureLocation=/etc/cas/saml/inc-md-public-key.pem
# cas.samlSP.inCommon.entityIds[0]=sampleSPEntityId

OpenID Connect

Allow CAS to become an OpenID Connect provider (OP). To learn more about this topic, please review this guide.

# cas.authn.oidc.issuer=http://localhost:8080/cas/oidc

# Skew ID tokens in minutes
# cas.authn.oidc.skew=5

# cas.authn.oidc.jwksFile=file:/keystore.jwks
# cas.authn.oidc.jwksCacheInMinutes=60

# cas.authn.oidc.dynamicClientRegistrationMode=OPEN|PROTECTED

# cas.authn.oidc.subjectTypes=public,pairwise

# Supported scopes
# cas.authn.oidc.scopes=openid,profile,email,address,phone,offline_access

# Supported claims
# cas.authn.oidc.claims=sub,name,preferred_username,family_name, \
#    given_name,middle_name,given_name,profile, \
#    picture,nickname,website,zoneinfo,locale,updated_at,birthdate, \
#    email,email_verified,phone_number,phone_number_verified,address

# Define custom scopes and claims
# cas.authn.oidc.userDefinedScopes.scope1=cn,givenName,photos,customAttribute
# cas.authn.oidc.userDefinedScopes.scope2=cn,givenName,photos,customAttribute2

# Map fixed claims to CAS attributes
# cas.authn.oidc.claimsMap.given_name=custom-given-name
# cas.authn.oidc.claimsMap.preferred_username=global-user-attribute

Pac4j Delegated AuthN

Act as a proxy, and delegate authentication to external identity providers. To learn more about this topic, please review this guide.

# cas.authn.pac4j.typedIdUsed=false
# cas.authn.pac4j.autoRedirect=false
# cas.authn.pac4j.name=

CAS

Delegate authentication to an external CAS server.

# cas.authn.pac4j.cas[0].loginUrl=
# cas.authn.pac4j.cas[0].protocol=
# (Optional) Friendly name for CAS, e.g. "This Organization" or "That Organization"
# cas.authn.pac4j.cas[0].clientName=

Facebook

Delegate authentication to Facebook.

# cas.authn.pac4j.facebook.fields=
# cas.authn.pac4j.facebook.id=
# cas.authn.pac4j.facebook.secret=
# cas.authn.pac4j.facebook.scope=
# cas.authn.pac4j.facebook.clientName=

LinkedIn

Delegate authentication to LinkedIn.

# cas.authn.pac4j.linkedIn.fields=
# cas.authn.pac4j.linkedIn.id=
# cas.authn.pac4j.linkedIn.secret=
# cas.authn.pac4j.linkedIn.scope=
# cas.authn.pac4j.linkedIn.clientName=

Twitter

Delegate authentication to Twitter.

# cas.authn.pac4j.twitter.id=
# cas.authn.pac4j.twitter.secret=
# cas.authn.pac4j.twitter.clientName=

Paypal

Delegate authentication to Paypal.

# cas.authn.pac4j.paypal.id=
# cas.authn.pac4j.paypal.secret=
# cas.authn.pac4j.paypal.clientName=

Wordpress

Delegate authentication to Wordpress.

# cas.authn.pac4j.wordpress.id=
# cas.authn.pac4j.wordpress.secret=
# cas.authn.pac4j.wordpress.clientName=

OAuth20

Delegate authentication to an generic OAuth2 server.

# cas.authn.pac4j.oauth2[0].id=
# cas.authn.pac4j.oauth2[0].secret=
# cas.authn.pac4j.oauth2[0].authUrl=
# cas.authn.pac4j.oauth2[0].tokenUrl=
# cas.authn.pac4j.oauth2[0].profileUrl=
# cas.authn.pac4j.oauth2[0].profilePath=
# cas.authn.pac4j.oauth2[0].profileVerb=GET|POST
# cas.authn.pac4j.oauth2[0].profileAttrs.attr1=path-to-attr-in-profile
# cas.authn.pac4j.oauth2[0].customParams.param1=value1
# (Optional) Friendly name for OAuth 2 provider, e.g. "This Organization" or "That Organization"
# cas.authn.pac4j.oauth2[0].clientName=

OpenID Connect

Delegate authentication to an external OpenID Connect server.

# cas.authn.pac4j.oidc[0].type=GOOGLE|AZURE|GENERIC
# cas.authn.pac4j.oidc[0].discoveryUri=
# cas.authn.pac4j.oidc[0].maxClockSkew=
# cas.authn.pac4j.oidc[0].scope=
# cas.authn.pac4j.oidc[0].id=
# cas.authn.pac4j.oidc[0].secret=
# cas.authn.pac4j.oidc[0].useNonce=
# cas.authn.pac4j.oidc[0].preferredJwsAlgorithm=
# cas.authn.pac4j.oidc[0].customParams.param1=value1
# (Optional) Friendly name for OIDC provider, e.g. "This Organization" or "That Organization"
# cas.authn.pac4j.oidc[0].clientName=

SAML

Delegate authentication to an external SAML2 IdP (do not use the resource: or classpath: prefixes for the keystorePath or identityProviderMetadataPath property).

# Settings required for CAS SP metadata generation process
# The keystore will be automatically generated by CAS with
# keys required for the metadata generation and/or exchange.
#
# cas.authn.pac4j.saml[0].keystorePassword=
# cas.authn.pac4j.saml[0].privateKeyPassword=
# cas.authn.pac4j.saml[0].keystorePath=

# The entityID assigned to CAS acting as the SP
# cas.authn.pac4j.saml[0].serviceProviderEntityId=

# Path to the auto-generated CAS SP metadata
# cas.authn.pac4j.saml[0].serviceProviderMetadataPath=

# cas.authn.pac4j.saml[0].maximumAuthenticationLifetime=

# Path/URL to delegated IdP metadata
# cas.authn.pac4j.saml[0].identityProviderMetadataPath=

Examine the generated metadata after accessing the CAS login screen to ensure all ports and endpoints are correctly adjusted.
Finally, share the CAS SP metadata with the delegated IdP and register CAS as an authorized relying party.

Yahoo

Delegate authentication to Yahoo.

# cas.authn.pac4j.yahoo.id=
# cas.authn.pac4j.yahoo.secret=
# cas.authn.pac4j.yahoo.clientName=

Dropbox

Delegate authentication to Dropbox.

# cas.authn.pac4j.dropbox.id=
# cas.authn.pac4j.dropbox.secret=
# cas.authn.pac4j.dropbox.clientName=

Github

Delegate authentication to Github.

# cas.authn.pac4j.github.id=
# cas.authn.pac4j.github.secret=
# cas.authn.pac4j.github.clientName=

Foursquare

Delegate authentication to Foursquare.

# cas.authn.pac4j.foursquare.id=
# cas.authn.pac4j.foursquare.secret=
# cas.authn.pac4j.foursquare.clientName=

WindowsLive

Delegate authentication to WindowsLive.

# cas.authn.pac4j.windowsLive.id=
# cas.authn.pac4j.windowsLive.secret=
# cas.authn.pac4j.windowsLive.clientName=

Google

Delegate authentication to Google.

# cas.authn.pac4j.google.id=
# cas.authn.pac4j.google.secret=
# cas.authn.pac4j.google.scope=EMAIL|PROFILE|EMAIL_AND_PROFILE
# cas.authn.pac4j.google.clientName=

WS Federation

Allow CAS to act as an identity provider and security token service to support the WS-Federation protocol.

To learn more about this topic, please review this guide

# cas.authn.wsfedIdP.idp.realm=urn:org:apereo:cas:ws:idp:realm-CAS
# cas.authn.wsfedIdP.idp.realmName=CAS

# cas.authn.wsfedIdP.sts.signingKeystoreFile=/etc/cas/config/ststrust.jks
# cas.authn.wsfedIdP.sts.signingKeystorePassword=storepass
# cas.authn.wsfedIdP.sts.encryptionKeystoreFile=/etc/cas/config/stsencrypt.jks
# cas.authn.wsfedIdP.sts.encryptionKeystorePassword=storepass

# cas.authn.wsfedIdP.sts.subjectNameIdFormat=unspecified
# cas.authn.wsfedIdP.sts.encryptTokens=true

# cas.authn.wsfedIdP.sts.realm.keystoreFile=/etc/cas/config/stscasrealm.jks
# cas.authn.wsfedIdP.sts.realm.keystorePassword=storepass
# cas.authn.wsfedIdP.sts.realm.keystoreAlias=realmcas
# cas.authn.wsfedIdP.sts.realm.keyPassword=cas
# cas.authn.wsfedIdP.sts.realm.issuer=CAS

Signing & Encryption

# Used to secure authentication requests between the IdP and STS
# cas.authn.wsfedIdP.sts.encryptionKey=
# cas.authn.wsfedIdP.sts.signingKey=

The signing and encryption keys are both JWKs of size 512 and 256. The encryption algorithm is set to AES_128_CBC_HMAC_SHA_256.

OAuth2

Allows CAS to act as an OAuth2 provider. Here you can control how long various tokens issued by CAS should last, etc.

To learn more about this topic, please review this guide.

# cas.authn.oauth.refreshToken.timeToKillInSeconds=2592000

# cas.authn.oauth.code.timeToKillInSeconds=30
# cas.authn.oauth.code.numberOfUses=1

# cas.authn.oauth.accessToken.releaseProtocolAttributes=true
# cas.authn.oauth.accessToken.timeToKillInSeconds=7200
# cas.authn.oauth.accessToken.maxTimeToLiveInSeconds=28800

# cas.authn.oauth.grants.resourceOwner.requireServiceHeader=true

Localization

To learn more about this topic, please review this guide.

# cas.locale.paramName=locale
# cas.locale.defaultValue=en

Global SSO Behavior

# cas.sso.missingService=true
# cas.sso.renewedAuthn=true

Warning Cookie

Created by CAS if and when users are to be warned when accessing CAS protected services.

# cas.warningCookie.path=
# cas.warningCookie.maxAge=-1
# cas.warningCookie.domain=
# cas.warningCookie.name=CASPRIVACY
# cas.warningCookie.secure=true
# cas.warningCookie.httpOnly=true

Ticket Granting Cookie

# cas.tgc.path=
# cas.tgc.maxAge=-1
# cas.tgc.domain=
# cas.tgc.name=TGC
# cas.tgc.secure=true
# cas.tgc.httpOnly=true
# cas.tgc.rememberMeMaxAge=1209600

# cas.tgc.encryptionKey=
# cas.tgc.signingKey=
# cas.tgc.cipherEnabled=true

Signing & Encryption

The signing and encryption keys are both JWKs of size 512 and 256. The encryption algorithm is set to AES_128_CBC_HMAC_SHA_256.

Logout

Control various settings related to CAS logout functionality. To learn more about this topic, please review this guide.

# cas.logout.followServiceRedirects=false
# cas.logout.redirectParameter=service
# cas.logout.confirmLogout=false

Single Logout

To learn more about this topic, please review this guide.

# cas.slo.disabled=false
# cas.slo.asynchronous=true

Clearpass

Capture and cache user credentials and optionally release them to trusted applications. To learn more about this topic, please review this guide.

# cas.clearpass.cacheCredential=false
# cas.clearpass.encryptionKey=
# cas.clearpass.signingKey=
# cas.clearpass.cipherEnabled=true;

The signing and encryption keys are both JWKs of size 512 and 256. The encryption algorithm is set to AES_128_CBC_HMAC_SHA_256.

Message Bundles

To learn more about this topic, please review this guide.

# cas.messageBundle.encoding=UTF-8
# cas.messageBundle.fallbackSystemLocale=false
# cas.messageBundle.cacheSeconds=180
# cas.messageBundle.useCodeMessage=true
# cas.messageBundle.baseNames=classpath:custom_messages,classpath:messages

Audits

Control how audit messages are formatted. To learn more about this topic, please review this guide.

# cas.audit.auditFormat=DEFAULT
# cas.audit.ignoreAuditFailures=false
# cas.audit.singlelineSeparator=|
# cas.audit.useSingleLine=false
# cas.audit.appCode=CAS
# cas.audit.alternateServerAddrHeaderName=
# cas.audit.alternateClientAddrHeaderName=X-Forwarded-For
# cas.audit.useServerHostAddress=false

Database Audits

Store audit logs inside a database.

# cas.audit.jdbc.healthQuery=
# cas.audit.jdbc.isolateInternalQueries=false
# cas.audit.jdbc.url=jdbc:hsqldb:mem:cas-hsql-database
# cas.audit.jdbc.failFast=true
# cas.audit.jdbc.isolationLevelName=ISOLATION_READ_COMMITTED
# cas.audit.jdbc.dialect=org.hibernate.dialect.HSQLDialect
# cas.audit.jdbc.leakThreshold=10
# cas.audit.jdbc.propagationBehaviorName=PROPAGATION_REQUIRED
# cas.audit.jdbc.batchSize=1
# cas.audit.jdbc.user=sa
# cas.audit.jdbc.ddlAuto=create-drop
# cas.audit.jdbc.maxAgeDays=180
# cas.audit.jdbc.password=
# cas.audit.jdbc.autocommit=false
# cas.audit.jdbc.driverClass=org.hsqldb.jdbcDriver
# cas.audit.jdbc.idleTimeout=5000
# cas.audit.jdbc.dataSourceName=
# cas.audit.jdbc.dataSourceProxy=false

# cas.audit.jdbc.pool.suspension=false
# cas.audit.jdbc.pool.minSize=6
# cas.audit.jdbc.pool.maxSize=18
# cas.audit.jdbc.pool.maxWait=2000

Sleuth Distributed Tracing

To learn more about this topic, please review this guide.

# spring.sleuth.sampler.percentage = 0.5
# spring.sleuth.enabled=true

# spring.zipkin.enabled=true
# spring.zipkin.baseUrl=http://localhost:9411/

Monitoring

To learn more about this topic, please review this guide.

Ticket Granting Tickets

Decide how CAS should monitor the generation of TGTs.

# cas.monitor.tgt.warn.threshold=10
# cas.monitor.tgt.warn.evictionThreshold=0

Service Tickets

Decide how CAS should monitor the generation of STs.

# cas.monitor.st.warn.threshold=10
# cas.monitor.st.warn.evictionThreshold=0

Cache Monitors

Decide how CAS should monitor the internal state of various cache storage services.

# cas.monitor.warn.threshold=10
# cas.monitor.warn.evictionThreshold=0

Database Monitoring

Decide how CAS should monitor the internal state of JDBC connections used for authentication or attribute retrieval.

# cas.monitor.jdbc.validationQuery=SELECT 1
# cas.monitor.jdbc.maxWait=5000
# cas.monitor.jdbc.healthQuery=
# cas.monitor.jdbc.isolateInternalQueries=false
# cas.monitor.jdbc.url=jdbc:hsqldb:mem:cas-hsql-database
# cas.monitor.jdbc.failFast=true
# cas.monitor.jdbc.isolationLevelName=ISOLATION_READ_COMMITTED
# cas.monitor.jdbc.dialect=org.hibernate.dialect.HSQLDialect
# cas.monitor.jdbc.leakThreshold=10
# cas.monitor.jdbc.propagationBehaviorName=PROPAGATION_REQUIRED
# cas.monitor.jdbc.batchSize=1
# cas.monitor.jdbc.user=sa
# cas.monitor.jdbc.ddlAuto=create-drop
# cas.monitor.jdbc.maxAgeDays=180
# cas.monitor.jdbc.password=
# cas.monitor.jdbc.autocommit=false
# cas.monitor.jdbc.driverClass=org.hsqldb.jdbcDriver
# cas.monitor.jdbc.idleTimeout=5000
# cas.monitor.jdbc.dataSourceName=
# cas.monitor.jdbc.dataSourceProxy=false

LDAP Connection Pool

Decide how CAS should monitor the internal state of LDAP connections used for authentication, etc.

# Define the thread pool that will ping on the LDAP connection pool.
# cas.monitor.ldap.pool.suspension=false
# cas.monitor.ldap.pool.minSize=6
# cas.monitor.ldap.pool.maxSize=18
# cas.monitor.ldap.pool.maxWait=2000

# cas.monitor.ldap.maxWait=5000

# Define the LDAP connection pool settings for monitoring
# cas.monitor.ldap.ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.monitor.ldap.connectionStrategy=
# cas.monitor.ldap.baseDn=dc=example,dc=org
# cas.monitor.ldap.userFilter=cn={user}
# cas.monitor.ldap.bindDn=cn=Directory Manager,dc=example,dc=org
# cas.monitor.ldap.bindCredential=Password
# cas.monitor.ldap.providerClass=org.ldaptive.provider.unboundid.UnboundIDProvider
# cas.monitor.ldap.connectTimeout=5000
# cas.monitor.ldap.trustCertificates=
# cas.monitor.ldap.keystore=
# cas.monitor.ldap.keystorePassword=
# cas.monitor.ldap.keystoreType=JKS|JCEKS|PKCS12
# cas.monitor.ldap.poolPassivator=NONE|CLOSE|BIND
# cas.monitor.ldap.minPoolSize=3
# cas.monitor.ldap.maxPoolSize=10
# cas.monitor.ldap.validateOnCheckout=true
# cas.monitor.ldap.validatePeriodically=true
# cas.monitor.ldap.validatePeriod=600
# cas.monitor.ldap.validateTimeout=5000
# cas.monitor.ldap.failFast=true
# cas.monitor.ldap.idleTime=500
# cas.monitor.ldap.prunePeriod=600
# cas.monitor.ldap.blockWaitTime=5000
# cas.monitor.ldap.subtreeSearch=true
# cas.monitor.ldap.useSsl=true
# cas.monitor.ldap.useStartTls=false

# cas.monitor.ldap.validator.type=NONE|SEARCH|COMPARE
# cas.monitor.ldap.validator.baseDn=
# cas.monitor.ldap.validator.searchFilter=(objectClass=*)
# cas.monitor.ldap.validator.scope=OBJECT|ONELEVEL|SUBTREE
# cas.monitor.ldap.validator.attributeName=objectClass
# cas.monitor.ldap.validator.attributeValues=top
# cas.monitor.ldap.validator.dn=

Memory

Decide how CAS should monitor the internal state of JVM memory available at runtime.

# cas.monitor.freeMemThreshold=10

Themes

To learn more about this topic, please review this guide.

# cas.theme.paramName=theme
# cas.theme.defaultThemeName=cas-theme-default

Events

Decide how CAS should track authentication events. To learn more about this topic, please review this guide.

# Whether geolocation tracking should be turned on and requested from the browser.
# cas.events.trackGeolocation=false

# Control whether CAS should monitor configuration files and auto-refresh context.
# cas.events.trackConfigurationModifications=true

Database Events

Decide how CAS should store authentication events inside a database instance.

# cas.events.jpa.healthQuery=
# cas.events.jpa.isolateInternalQueries=false
# cas.events.jpa.url=jdbc:hsqldb:mem:cas-events
# cas.events.jpa.failFast=true
# cas.events.jpa.dialect=org.hibernate.dialect.HSQLDialect
# cas.events.jpa.leakThreshold=10
# cas.events.jpa.batchSize=1
# cas.events.jpa.defaultCatalog=
# cas.events.jpa.defaultSchema=
# cas.events.jpa.user=sa
# cas.events.jpa.ddlAuto=create-drop
# cas.events.jpa.password=
# cas.events.jpa.autocommit=false
# cas.events.jpa.driverClass=org.hsqldb.jdbcDriver
# cas.events.jpa.idleTimeout=5000
# cas.events.jpa.dataSourceName=
# cas.events.jpa.dataSourceProxy=false

# cas.events.jpa.pool.suspension=false
# cas.events.jpa.pool.minSize=6
# cas.events.jpa.pool.maxSize=18
# cas.events.jpa.pool.maxWait=2000

MongoDb Events

Decide how CAS should store authentication events inside a MongoDb instance.

# cas.events.mongodb.clientUri=
# cas.events.mongodb.dropCollection=false
# cas.events.mongodb.collection=MongoDbCasEventRepository

Http Web Requests

Control how CAS should respond and validate incoming HTTP requests.

# cas.httpWebRequest.header.xframe=true
# cas.httpWebRequest.header.xss=true
# cas.httpWebRequest.header.hsts=true
# cas.httpWebRequest.header.xcontent=true
# cas.httpWebRequest.header.cache=true

# cas.httpWebRequest.cors.enabled=false
# cas.httpWebRequest.cors.allowCredentials=false
# cas.httpWebRequest.cors.allowOrigins[0]=
# cas.httpWebRequest.cors.allowMethods[0]=*
# cas.httpWebRequest.cors.allowHeaders[0]=*
# cas.httpWebRequest.cors.maxAge=3600
# cas.httpWebRequest.cors.exposedHeaders[0]=

# cas.httpWebRequest.web.forceEncoding=true
# cas.httpWebRequest.web.encoding=UTF-8

# cas.httpWebRequest.allowMultiValueParameters=false
# cas.httpWebRequest.onlyPostParams=username,password
# cas.httpWebRequest.paramsToCheck=ticket,service,renew,gateway,warn,method,target,SAMLart,pgtUrl,pgt,pgtId,pgtIou,targetService,entityId,token

spring.http.encoding.charset=UTF-8
spring.http.encoding.enabled=true
spring.http.encoding.force=true

Http Client

Control how CAS should attempt to contact resources on the web via its own Http Client. This is most commonly used when responding to ticket validation events and/or single logout.

In the event that local certificates are to be imported into the CAS running environment, a local truststore is provided by CAS to improve portability of configuration across environments.

# cas.httpClient.connectionTimeout=5000
# cas.httpClient.asyncTimeout=5000
# cas.httpClient.readTimeout=5000
# cas.httpClient.hostnameVerifier=NONE|DEFAULT

# cas.httpClient.truststore.psw=changeit
# cas.httpClient.truststore.file=classpath:/truststore.jks

Hostname Verification

The default options are avaiable for hostname verification:

Service Registry

# cas.serviceRegistry.watcherEnabled=true
# cas.serviceRegistry.repeatInterval=120000
# cas.serviceRegistry.startDelay=15000
# cas.serviceRegistry.initFromJson=false

Resource-based (JSON/YAML) Service Registry

If the underlying service registry is using local system resources to locate service definitions, decide how those resources should be found.

# cas.serviceRegistry.config.location=classpath:/services

To learn more about this topic, please review this guide or this guide.

DynamoDb Service Registry

To learn more about this topic, please review this guide.

# Path to an external properties file that contains 'accessKey' and 'secretKey' fields.
# cas.serviceRegistry.dynamoDb.credentialsPropertiesFile=file:/path/to/file.properties

# Alternatively, you may directly provide credentials to CAS
# cas.serviceRegistry.dynamoDb.credentialAccessKey=
# cas.serviceRegistry.dynamoDb.credentialSecretKey=

# cas.serviceRegistry.dynamoDb.endpoint=http://localhost:8000
# cas.serviceRegistry.dynamoDb.region=US_WEST_2|US_EAST_2|EU_WEST_2|<REGION-NAME>
# cas.serviceRegistry.dynamoDb.regionOverride=
# cas.serviceRegistry.dynamoDb.serviceNameIntern=

# cas.serviceRegistry.dynamoDb.dropTablesOnStartup=false
# cas.serviceRegistry.dynamoDb.timeOffset=0

# cas.serviceRegistry.dynamoDb.readCapacity=10
# cas.serviceRegistry.dynamoDb.writeCapacity=10
# cas.serviceRegistry.dynamoDb.connectionTimeout=5000
# cas.serviceRegistry.dynamoDb.requestTimeout=5000
# cas.serviceRegistry.dynamoDb.socketTimeout=5000
# cas.serviceRegistry.dynamoDb.useGzip=false
# cas.serviceRegistry.dynamoDb.useReaper=false
# cas.serviceRegistry.dynamoDb.useThrottleRetries=false
# cas.serviceRegistry.dynamoDb.useTcpKeepAlive=false
# cas.serviceRegistry.dynamoDb.protocol=HTTPS
# cas.serviceRegistry.dynamoDb.clientExecutionTimeout=10000
# cas.serviceRegistry.dynamoDb.cacheResponseMetadata=false
# cas.serviceRegistry.dynamoDb.localAddress=
# cas.serviceRegistry.dynamoDb.maxConnections=10

# cas.serviceRegistry.dynamoDb.crypto.signing.key=
# cas.serviceRegistry.dynamoDb.crypto.signing.keySize=512
# cas.serviceRegistry.dynamoDb.crypto.encryption.key=
# cas.serviceRegistry.dynamoDb.crypto.encryption.keySize=16
# cas.serviceRegistry.dynamoDb.crypto.alg=AES

MongoDb Service Registry

Store CAS service definitions inside a MongoDb instance. To learn more about this topic, please review this guide.

# cas.serviceRegistry.mongo.idleTimeout=30000
# cas.serviceRegistry.mongo.port=27017
# cas.serviceRegistry.mongo.dropCollection=false
# cas.serviceRegistry.mongo.socketKeepAlive=false
# cas.serviceRegistry.mongo.password=
# cas.serviceRegistry.mongo.collectionName=cas-service-registry
# cas.serviceRegistry.mongo.databaseName=cas-mongo-database
# cas.serviceRegistry.mongo.timeout=5000
# cas.serviceRegistry.mongo.userId=
# cas.serviceRegistry.mongo.writeConcern=NORMAL
# cas.serviceRegistry.mongo.host=localhost

# cas.serviceRegistry.mongo.conns.lifetime=60000
# cas.serviceRegistry.mongo.conns.perHost=10

LDAP Service Registry

Control how CAS services should be found inside an LDAP instance. To learn more about this topic, please review this guide

# cas.serviceRegistry.ldap.serviceDefinitionAttribute=description
# cas.serviceRegistry.ldap.idAttribute=uid
# cas.serviceRegistry.ldap.objectClass=casRegisteredService

# cas.serviceRegistry.ldap.ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.serviceRegistry.ldap.connectionStrategy=
# cas.serviceRegistry.ldap.baseDn=dc=example,dc=org
# cas.serviceRegistry.ldap.bindDn=cn=Directory Manager,dc=example,dc=org
# cas.serviceRegistry.ldap.bindCredential=Password
# cas.serviceRegistry.ldap.providerClass=org.ldaptive.provider.unboundid.UnboundIDProvider
# cas.serviceRegistry.ldap.connectTimeout=5000
# cas.serviceRegistry.ldap.trustCertificates=
# cas.serviceRegistry.ldap.keystore=
# cas.serviceRegistry.ldap.keystorePassword=
# cas.serviceRegistry.ldap.keystoreType=JKS|JCEKS|PKCS12
# cas.serviceRegistry.ldap.poolPassivator=NONE|CLOSE|BIND
# cas.serviceRegistry.ldap.minPoolSize=3
# cas.serviceRegistry.ldap.maxPoolSize=10
# cas.serviceRegistry.ldap.validateOnCheckout=true
# cas.serviceRegistry.ldap.validatePeriodically=true
# cas.serviceRegistry.ldap.validatePeriod=600
# cas.serviceRegistry.ldap.validateTimeout=5000
# cas.serviceRegistry.ldap.failFast=true
# cas.serviceRegistry.ldap.idleTime=500
# cas.serviceRegistry.ldap.prunePeriod=600
# cas.serviceRegistry.ldap.blockWaitTime=5000
# cas.serviceRegistry.ldap.useSsl=true
# cas.serviceRegistry.ldap.useStartTls=false

# cas.serviceRegistry.ldap.validator.type=NONE|SEARCH|COMPARE
# cas.serviceRegistry.ldap.validator.baseDn=
# cas.serviceRegistry.ldap.validator.searchFilter=(objectClass=*)
# cas.serviceRegistry.ldap.validator.scope=OBJECT|ONELEVEL|SUBTREE
# cas.serviceRegistry.ldap.validator.attributeName=objectClass
# cas.serviceRegistry.ldap.validator.attributeValues=top
# cas.serviceRegistry.ldap.validator.dn=

Couchbase Service Registry

Control how CAS services should be found inside a Couchbase instance. To learn more about this topic, please review this guide

# cas.serviceRegistry.couchbase.nodeSet=localhost:8091
# cas.serviceRegistry.couchbase.password=
# cas.serviceRegistry.couchbase.queryEnabled=true
# cas.serviceRegistry.couchbase.bucket=default
# cas.serviceRegistry.couchbase.timeout=10

Database Service Registry

Control how CAS services should be found inside a database instance. To learn more about this topic, please review this guide

# cas.serviceRegistry.jpa.healthQuery=
# cas.serviceRegistry.jpa.isolateInternalQueries=false
# cas.serviceRegistry.jpa.url=jdbc:hsqldb:mem:cas-service-registry
# cas.serviceRegistry.jpa.failFast=true
# cas.serviceRegistry.jpa.dialect=org.hibernate.dialect.HSQLDialect
# cas.serviceRegistry.jpa.leakThreshold=10
# cas.serviceRegistry.jpa.batchSize=1
# cas.serviceRegistry.jpa.user=sa
# cas.serviceRegistry.jpa.ddlAuto=create-drop
# cas.serviceRegistry.jpa.password=
# cas.serviceRegistry.jpa.autocommit=false
# cas.serviceRegistry.jpa.driverClass=org.hsqldb.jdbcDriver
# cas.serviceRegistry.jpa.idleTimeout=5000
# cas.serviceRegistry.jpa.dataSourceName=
# cas.serviceRegistry.jpa.dataSourceProxy=false

# cas.serviceRegistry.jpa.pool.suspension=false
# cas.serviceRegistry.jpa.pool.minSize=6
# cas.serviceRegistry.jpa.pool.maxSize=18
# cas.serviceRegistry.jpa.pool.maxWait=2000

Database-specific properties can be specified under cas.serviceRegistry.jpa.properties, similar to Spring Boot JPA properties.

Ticket Registry

To learn more about this topic, please review this guide.

Signing & Encryption

The encryption key must be randomly-generated string whose length is defined by the encryption key size setting. The signing key is a JWK whose length is defined by the signing key size setting.

Cleaner

A cleaner process is scheduled to run in the background to clean up expired and stale tickets. This section controls how that process should behave.

# cas.ticket.registry.cleaner.appId=cas-ticket-registry-cleaner
# cas.ticket.registry.cleaner.startDelay=10000
# cas.ticket.registry.cleaner.repeatInterval=60000
# cas.ticket.registry.cleaner.enabled=true

JPA Ticket Registry

To learn more about this topic, please review this guide.

# cas.ticket.registry.jpa.ticketLockType=NONE
# cas.ticket.registry.jpa.jpaLockingTimeout=3600

# cas.ticket.registry.jpa.healthQuery=
# cas.ticket.registry.jpa.isolateInternalQueries=false
# cas.ticket.registry.jpa.url=jdbc:hsqldb:mem:cas-ticket-registry
# cas.ticket.registry.jpa.failFast=true
# cas.ticket.registry.jpa.dialect=org.hibernate.dialect.HSQLDialect
# cas.ticket.registry.jpa.leakThreshold=10
# cas.ticket.registry.jpa.jpaLockingTgtEnabled=true
# cas.ticket.registry.jpa.batchSize=1
# cas.ticket.registry.jpa.defaultCatalog=
# cas.ticket.registry.jpa.defaultSchema=
# cas.ticket.registry.jpa.user=sa
# cas.ticket.registry.jpa.ddlAuto=create-drop
# cas.ticket.registry.jpa.password=
# cas.ticket.registry.jpa.autocommit=false
# cas.ticket.registry.jpa.driverClass=org.hsqldb.jdbcDriver
# cas.ticket.registry.jpa.idleTimeout=5000
# cas.ticket.registry.jpa.dataSourceName=
# cas.ticket.registry.jpa.dataSourceProxy=false

# cas.ticket.registry.jpa.pool.suspension=false
# cas.ticket.registry.jpa.pool.minSize=6
# cas.ticket.registry.jpa.pool.maxSize=18
# cas.ticket.registry.jpa.pool.maxWait=2000

# cas.ticket.registry.jpa.crypto.signing.key=
# cas.ticket.registry.jpa.crypto.signing.keySize=512
# cas.ticket.registry.jpa.crypto.encryption.key=
# cas.ticket.registry.jpa.crypto.encryption.keySize=16
# cas.ticket.registry.jpa.crypto.alg=AES

Database-specific properties can be specified under cas.ticket.registry.jpa.properties, similar to Spring Boot JPA properties.

Couchbase Ticket Registry

To learn more about this topic, please review this guide.

# cas.ticket.registry.couchbase.timeout=10
# cas.ticket.registry.couchbase.nodeSet=localhost:8091
# cas.ticket.registry.couchbase.password=
# cas.ticket.registry.couchbase.queryEnabled=true
# cas.ticket.registry.couchbase.bucket=default

# cas.ticket.registry.couchbase.crypto.signing.key=
# cas.ticket.registry.couchbase.crypto.signing.keySize=512
# cas.ticket.registry.couchbase.crypto.encryption.key=
# cas.ticket.registry.couchbase.crypto.encryption.keySize=16
# cas.ticket.registry.couchbase.crypto.alg=AES

Hazelcast Ticket Registry

To learn more about this topic, please review this guide.

# cas.ticket.registry.hazelcast.pageSize=500
# cas.ticket.registry.hazelcast.configLocation=

# cas.ticket.registry.hazelcast.cluster.evictionPolicy=LRU
# cas.ticket.registry.hazelcast.cluster.maxNoHeartbeatSeconds=300
# cas.ticket.registry.hazelcast.cluster.multicastEnabled=false
# cas.ticket.registry.hazelcast.cluster.tcpipEnabled=true
# cas.ticket.registry.hazelcast.cluster.members=localhost
# cas.ticket.registry.hazelcast.cluster.loggingType=slf4j
# cas.ticket.registry.hazelcast.cluster.instanceName=localhost
# cas.ticket.registry.hazelcast.cluster.port=5701
# cas.ticket.registry.hazelcast.cluster.portAutoIncrement=true
# cas.ticket.registry.hazelcast.cluster.maxHeapSizePercentage=85
# cas.ticket.registry.hazelcast.cluster.backupCount=1
# cas.ticket.registry.hazelcast.cluster.asyncBackupCount=0
# cas.ticket.registry.hazelcast.cluster.maxSizePolicy=USED_HEAP_PERCENTAGE
# cas.ticket.registry.hazelcast.cluster.timeout=5

# cas.ticket.registry.hazelcast.cluster.multicastTrustedInterfaces=
# cas.ticket.registry.hazelcast.cluster.multicastPort=
# cas.ticket.registry.hazelcast.cluster.multicastGroup=
# cas.ticket.registry.hazelcast.cluster.multicastTimeout=2
# cas.ticket.registry.hazelcast.cluster.multicastTimeToLive=32

# cas.ticket.registry.hazelcast.crypto.signing.key=
# cas.ticket.registry.hazelcast.crypto.signing.keySize=512
# cas.ticket.registry.hazelcast.crypto.encryption.key=
# cas.ticket.registry.hazelcast.crypto.encryption.keySize=16
# cas.ticket.registry.hazelcast.crypto.alg=AES

Infinispan Ticket Registry

To learn more about this topic, please review this guide.

# cas.ticket.registry.infinispan.cacheName=
# cas.ticket.registry.infinispan.configLocation=/infinispan.xml

# cas.ticket.registry.infinispan.crypto.signing.key=
# cas.ticket.registry.infinispan.crypto.signing.keySize=512
# cas.ticket.registry.infinispan.crypto.encryption.key=
# cas.ticket.registry.infinispan.crypto.encryption.keySize=16
# cas.ticket.registry.infinispan.crypto.alg=AES

InMemory Ticket Registry

This is typically the default ticket registry instance where tickets are kept inside the runtime environment memory.

# cas.ticket.registry.inMemory.loadFactor=1
# cas.ticket.registry.inMemory.concurrency=20
# cas.ticket.registry.inMemory.initialCapacity=1000

# cas.ticket.registry.inMemory.crypto.signing.key=
# cas.ticket.registry.inMemory.crypto.signing.keySize=512
# cas.ticket.registry.inMemory.crypto.encryption.key=
# cas.ticket.registry.inMemory.crypto.encryption.keySize=16
# cas.ticket.registry.inMemory.crypto.alg=AES

Ehcache Ticket Registry

To learn more about this topic, please review this guide.

# cas.ticket.registry.ehcache.replicateUpdatesViaCopy=true
# cas.ticket.registry.ehcache.cacheManagerName=ticketRegistryCacheManager
# cas.ticket.registry.ehcache.replicatePuts=true
# cas.ticket.registry.ehcache.replicateUpdates=true
# cas.ticket.registry.ehcache.memoryStoreEvictionPolicy=LRU
# cas.ticket.registry.ehcache.configLocation=classpath:/ehcache-replicated.xml
# cas.ticket.registry.ehcache.maximumBatchSize=100
# cas.ticket.registry.ehcache.shared=false
# cas.ticket.registry.ehcache.replicationInterval=10000
# cas.ticket.registry.ehcache.cacheTimeToLive=2147483647
# cas.ticket.registry.ehcache.diskExpiryThreadIntervalSeconds=0
# cas.ticket.registry.ehcache.replicateRemovals=true
# cas.ticket.registry.ehcache.maxChunkSize=5000000
# cas.ticket.registry.ehcache.maxElementsOnDisk=0
# cas.ticket.registry.ehcache.maxElementsInCache=0
# cas.ticket.registry.ehcache.maxElementsInMemory=10000
# cas.ticket.registry.ehcache.cacheName=org.apereo.cas.ticket.TicketCache
# cas.ticket.registry.ehcache.eternal=false
# cas.ticket.registry.ehcache.loaderAsync=true
# cas.ticket.registry.ehcache.replicatePutsViaCopy=true
# cas.ticket.registry.ehcache.cacheTimeToIdle=0
# cas.ticket.registry.ehcache.persistence=LOCALTEMPSWAP|NONE|LOCALRESTARTABLE|DISTRIBUTED
# cas.ticket.registry.ehcache.synchronousWrites=

# cas.ticket.registry.ehcache.crypto.signing.key=
# cas.ticket.registry.ehcache.crypto.signing.keySize=512
# cas.ticket.registry.ehcache.crypto.encryption.key=
# cas.ticket.registry.ehcache.crypto.encryption.keySize=16
# cas.ticket.registry.ehcache.crypto.alg=AES

Ignite Ticket Registry

To learn more about this topic, please review this guide.

# cas.ticket.registry.ignite.keyAlgorithm=
# cas.ticket.registry.ignite.protocol=
# cas.ticket.registry.ignite.trustStorePassword=
# cas.ticket.registry.ignite.keyStoreType=
# cas.ticket.registry.ignite.keyStoreFilePath=
# cas.ticket.registry.ignite.keyStorePassword=
# cas.ticket.registry.ignite.trustStoreType=
# cas.ticket.registry.ignite.igniteAddresses=localhost:47500
# cas.ticket.registry.ignite.trustStoreFilePath=
# cas.ticket.registry.ignite.heartbeatFrequency=2000
# cas.ticket.registry.ignite.joinTimeout=1000
# cas.ticket.registry.ignite.localAddress=
# cas.ticket.registry.ignite.localPort=-1
# cas.ticket.registry.ignite.networkTimeout=5000
# cas.ticket.registry.ignite.socketTimeout=5000
# cas.ticket.registry.ignite.threadPriority=10
# cas.ticket.registry.ignite.forceServerMode=false

# cas.ticket.registry.ignite.ticketsCache.writeSynchronizationMode=FULL_SYNC
# cas.ticket.registry.ignite.ticketsCache.atomicityMode=TRANSACTIONAL
# cas.ticket.registry.ignite.ticketsCache.cacheName=TicketsCache
# cas.ticket.registry.ignite.ticketsCache.cacheMode=REPLICATED

# cas.ticket.registry.ignite.crypto.signing.key=
# cas.ticket.registry.ignite.crypto.signing.keySize=512
# cas.ticket.registry.ignite.crypto.encryption.key=
# cas.ticket.registry.ignite.crypto.encryption.keySize=16
# cas.ticket.registry.ignite.crypto.alg=AES

Memcached Ticket Registry

To learn more about this topic, please review this guide.

# cas.ticket.registry.memcached.servers=localhost:11211
# cas.ticket.registry.memcached.locatorType=ARRAY_MOD
# cas.ticket.registry.memcached.failureMode=Redistribute
# cas.ticket.registry.memcached.hashAlgorithm=FNV1_64_HASH

# cas.ticket.registry.memcached.crypto.signing.key=
# cas.ticket.registry.memcached.crypto.signing.keySize=512
# cas.ticket.registry.memcached.crypto.encryption.key=
# cas.ticket.registry.memcached.crypto.encryption.keySize=16
# cas.ticket.registry.memcached.crypto.alg=AES

DynamoDb Ticket Registry

To learn more about this topic, please review this guide.

# Path to an external properties file that contains 'accessKey' and 'secretKey' fields.
# cas.ticket.registry.dynamoDb.credentialsPropertiesFile=file:/path/to/file.properties

# Alternatively, you may directly provide credentials to CAS
# cas.ticket.registry.dynamoDb.credentialAccessKey=
# cas.ticket.registry.dynamoDb.credentialSecretKey=

# cas.ticket.registry.dynamoDb.endpoint=http://localhost:8000
# cas.ticket.registry.dynamoDb.region=US_WEST_2|US_EAST_2|EU_WEST_2|<REGION-NAME>
# cas.ticket.registry.dynamoDb.regionOverride=
# cas.ticket.registry.dynamoDb.serviceNameIntern=

# cas.ticket.registry.dynamoDb.dropTablesOnStartup=false
# cas.ticket.registry.dynamoDb.timeOffset=0

# cas.ticket.registry.dynamoDb.readCapacity=10
# cas.ticket.registry.dynamoDb.writeCapacity=10
# cas.ticket.registry.dynamoDb.connectionTimeout=5000
# cas.ticket.registry.dynamoDb.requestTimeout=5000
# cas.ticket.registry.dynamoDb.socketTimeout=5000
# cas.ticket.registry.dynamoDb.useGzip=false
# cas.ticket.registry.dynamoDb.useReaper=false
# cas.ticket.registry.dynamoDb.useThrottleRetries=false
# cas.ticket.registry.dynamoDb.useTcpKeepAlive=false
# cas.ticket.registry.dynamoDb.protocol=HTTPS
# cas.ticket.registry.dynamoDb.clientExecutionTimeout=10000
# cas.ticket.registry.dynamoDb.cacheResponseMetadata=false
# cas.ticket.registry.dynamoDb.localAddress=
# cas.ticket.registry.dynamoDb.maxConnections=10

# cas.ticket.registry.dynamoDb.crypto.signing.key=
# cas.ticket.registry.dynamoDb.crypto.signing.keySize=512
# cas.ticket.registry.dynamoDb.crypto.encryption.key=
# cas.ticket.registry.dynamoDb.crypto.encryption.keySize=16
# cas.ticket.registry.dynamoDb.crypto.alg=AES

MongoDb Ticket Registry

To learn more about this topic, please review this guide.

# cas.ticket.registry.mongo.idleTimeout=30000
# cas.ticket.registry.mongo.port=27017
# cas.ticket.registry.mongo.dropCollection=false
# cas.ticket.registry.mongo.socketKeepAlive=false
# cas.ticket.registry.mongo.password=
# cas.ticket.registry.mongo.collectionName=cas-ticket-registry
# cas.ticket.registry.mongo.databaseName=cas-database
# cas.ticket.registry.mongo.timeout=5000
# cas.ticket.registry.mongo.userId=
# cas.ticket.registry.mongo.writeConcern=NORMAL
# cas.ticket.registry.mongo.host=localhost

# cas.ticket.mongo.conns.lifetime=60000
# cas.ticket.mongo.conns.perHost=10

Redis Ticket Registry

To learn more about this topic, please review this guide.

## Redis server host.
# cas.ticket.registry.redis.host=localhost
#
## Database index used by the connection factory.
# cas.ticket.registry.redis.database=0
#
## Redis server port.
# cas.ticket.registry.redis.port=6379
#
## Login password of the redis server.
# cas.ticket.registry.redis.password=
#
## Connection timeout in milliseconds
# cas.ticket.registry.redis.timeout=
#
##
# cas.ticket.registry.redis.pool.max-active=20
#
## Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.
# cas.ticket.registry.redis.pool.maxIdle=8
#
## Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive.
# cas.ticket.registry.redis.pool.minIdle=0
#
## Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.
# cas.ticket.registry.redis.pool.maxActive=8
#
## Maximum amount of time (in milliseconds) a connection allocation should block
#  before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.
# cas.ticket.registry.redis.pool.maxWait=-1

# cas.ticket.registry.redis.crypto.signing.key=
# cas.ticket.registry.redis.crypto.signing.keySize=512
# cas.ticket.registry.redis.crypto.encryption.key=
# cas.ticket.registry.redis.crypto.encryption.keySize=16
# cas.ticket.registry.redis.crypto.alg=AES

Protocol Ticket Security

Controls whether tickets issued by the CAS server should be secured via signing and encryption when shared with client applications on outgoing calls.

# cas.ticket.security.cipherEnabled=true
# cas.ticket.security.encryptionKey=
# cas.ticket.security.signingKey=

The signing and encryption keys are both JWKs of size 512 and 256. The encryption algorithm is set to AES_128_CBC_HMAC_SHA_256.

Service Tickets Behavior

Controls the expiration policy of service tickets, as well as other properties applicable to STs.

# cas.ticket.st.maxLength=20

# cas.ticket.st.numberOfUses=1
# cas.ticket.st.timeToKillInSeconds=10

Proxy Granting Tickets Behavior

# cas.ticket.pgt.maxLength=50

Proxy Tickets Behavior

# cas.ticket.pt.timeToKillInSeconds=10
# cas.ticket.pt.numberOfUses=1

Ticket Granting Tickets Behavior

# cas.ticket.tgt.onlyTrackMostRecentSession=true
# cas.ticket.tgt.maxLength=50

TGT Expiration Policy

Default

Provides a hard-time out as well as a sliding window.

# Set to a negative value to never expire tickets
# cas.ticket.tgt.maxTimeToLiveInSeconds=28800
# cas.ticket.tgt.timeToKillInSeconds=7200

Remember Me

# cas.ticket.tgt.rememberMe.enabled=true
# cas.ticket.tgt.rememberMe.timeToKillInSeconds=28800

Timeout

The expiration policy applied to TGTs provides for most-recently-used expiration policy, similar to a Web server session timeout.

# cas.ticket.tgt.timeout.maxTimeToLiveInSeconds=28800

Throttled Timeout

The throttled timeout policy extends the Timeout policy with the concept of throttling where a ticket may be used at most every N seconds.

# cas.ticket.tgt.throttledTimeout.timeToKillInSeconds=28800
# cas.ticket.tgt.throttledTimeout.timeInBetweenUsesInSeconds=5

Hard Timeout

The hard timeout policy provides for finite ticket lifetime as measured from the time of creation.

# cas.ticket.tgt.hardTimeout.timeToKillInSeconds=28800

Management Webapp

To learn more about this topic, please review this guide.

# server.contextPath=/cas-management

# cas.mgmt.adminRoles[0]=ROLE_ADMIN
# cas.mgmt.adminRoles[1]=ROLE_SUPER_USER

# cas.mgmt.userPropertiesFile=classpath:/user-details.properties
# cas.mgmt.serverName=https://localhost:8443
# cas.mgmt.defaultLocale=en

# cas.mgmt.authzAttributes[0]=memberOf
# cas.mgmt.authzAttributes[1]=groupMembership

LDAP Authorization

# cas.mgmt.ldap.ldapAuthz.groupAttribute=
# cas.mgmt.ldap.ldapAuthz.groupPrefix=
# cas.mgmt.ldap.ldapAuthz.groupFilter=
# cas.mgmt.ldap.ldapAuthz.groupBaseDn=
# cas.mgmt.ldap.ldapAuthz.rolePrefix=ROLE_
# cas.mgmt.ldap.ldapAuthz.roleAttribute=uugid
# cas.mgmt.ldap.ldapAuthz.searchFilter=cn={user}
# cas.mgmt.ldap.ldapAuthz.baseDn=

# cas.mgmt.ldap.allowMultipleResults=false
# cas.mgmt.ldap.baseDn=dc=example,dc=org
# cas.mgmt.ldap.ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.mgmt.ldap.connectionStrategy=
# cas.mgmt.ldap.baseDn=dc=example,dc=org
# cas.mgmt.ldap.userFilter=cn={user}
# cas.mgmt.ldap.bindDn=cn=Directory Manager,dc=example,dc=org
# cas.mgmt.ldap.bindCredential=Password
# cas.mgmt.ldap.providerClass=org.ldaptive.provider.unboundid.UnboundIDProvider
# cas.mgmt.ldap.connectTimeout=5000
# cas.mgmt.ldap.trustCertificates=
# cas.mgmt.ldap.keystore=
# cas.mgmt.ldap.keystorePassword=
# cas.mgmt.ldap.keystoreType=JKS|JCEKS|PKCS12
# cas.mgmt.ldap.poolPassivator=NONE|CLOSE|BIND
# cas.mgmt.ldap.minPoolSize=3
# cas.mgmt.ldap.maxPoolSize=10
# cas.mgmt.ldap.validateOnCheckout=true
# cas.mgmt.ldap.validatePeriodically=true
# cas.mgmt.ldap.validatePeriod=600
# cas.mgmt.ldap.validateTimeout=5000
# cas.mgmt.ldap.failFast=true
# cas.mgmt.ldap.idleTime=500
# cas.mgmt.ldap.prunePeriod=600
# cas.mgmt.ldap.blockWaitTime=5000
# cas.mgmt.ldap.subtreeSearch=true
# cas.mgmt.ldap.useSsl=true
# cas.mgmt.ldap.useStartTls=false

Google reCAPTCHA Integration

Display Google's reCAPTCHA widget on the CAS login page.

# cas.googleRecaptcha.verifyUrl=https://www.google.com/recaptcha/api/siteverify
# cas.googleRecaptcha.siteKey=
# cas.googleRecaptcha.secret=

Google Analytics Integration

To learn more about this topic, please review this guide.

# cas.googleAnalytics.googleAnalyticsTrackingId=

Spring Webflow

Control how Spring Webflow's conversational session state should be managed by CAS, and all other webflow related settings.

To learn more about this topic, please review this guide or this guide.

# cas.webflow.autoconfigure=true
# cas.webflow.alwaysPauseRedirect=false
# cas.webflow.refresh=true
# cas.webflow.redirectSameState=false

# cas.webflow.session.lockTimeout=30
# cas.webflow.session.compress=false
# cas.webflow.session.maxConversations=5
# cas.webflow.session.storage=true

# Manage session storage via Hazelcast
# cas.webflow.session.hzLocation=classpath:/hazelcast.xml

# Manage session storage via Mongo
# spring.data.mongodb.host=mongo-srv
# spring.data.mongodb.port=27018
# spring.data.mongodb.database=prod

# Manage session storage via Redis
# spring.session.store-type=redis
# spring.redis.host=localhost
# spring.redis.password=secret
# spring.redis.port=6379

# cas.webflow.signing.key=
# cas.webflow.signing.keySize=512
# cas.webflow.encryption.keySize=16
# cas.webflow.encryption.key=
# cas.webflow.alg=AES

The encryption key must be randomly-generated string whose length is defined by the encryption key size setting. The signing key is a JWK whose length is defined by the signing key size setting.

Authentication Exceptions

Map custom authentication exceptions in the CAS webflow and link them to custom messages defined in message bundles.

To learn more about this topic, please review this guide.

# cas.authn.exceptions.exceptions=value1,value2,...

Acceptable Usage Policy

Decide how CAS should attempt to determine whether AUP is accepted. To learn more about this topic, please review this guide.

# cas.acceptableUsagePolicy.aupAttributeName=aupAccepted

LDAP

If AUP is controlled via LDAP, decide how choices should be remembered back inside the LDAP instance.

# cas.acceptableUsagePolicy.ldap.ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.acceptableUsagePolicy.ldap.connectionStrategy=
# cas.acceptableUsagePolicy.ldap.baseDn=dc=example,dc=org
# cas.acceptableUsagePolicy.ldap.userFilter=cn={user}
# cas.acceptableUsagePolicy.ldap.bindDn=cn=Directory Manager,dc=example,dc=org
# cas.acceptableUsagePolicy.ldap.bindCredential=Password
# cas.acceptableUsagePolicy.ldap.providerClass=org.ldaptive.provider.unboundid.UnboundIDProvider
# cas.acceptableUsagePolicy.ldap.connectTimeout=5000
# cas.acceptableUsagePolicy.ldap.trustCertificates=
# cas.acceptableUsagePolicy.ldap.keystore=
# cas.acceptableUsagePolicy.ldap.keystorePassword=
# cas.acceptableUsagePolicy.ldap.keystoreType=JKS|JCEKS|PKCS12
# cas.acceptableUsagePolicy.ldap.poolPassivator=NONE|CLOSE|BIND
# cas.acceptableUsagePolicy.ldap.minPoolSize=3
# cas.acceptableUsagePolicy.ldap.maxPoolSize=10
# cas.acceptableUsagePolicy.ldap.validateOnCheckout=true
# cas.acceptableUsagePolicy.ldap.validatePeriodically=true
# cas.acceptableUsagePolicy.ldap.validatePeriod=600
# cas.acceptableUsagePolicy.ldap.validateTimeout=5000
# cas.acceptableUsagePolicy.ldap.failFast=true
# cas.acceptableUsagePolicy.ldap.idleTime=500
# cas.acceptableUsagePolicy.ldap.prunePeriod=600
# cas.acceptableUsagePolicy.ldap.blockWaitTime=5000
# cas.acceptableUsagePolicy.ldap.useSsl=true
# cas.acceptableUsagePolicy.ldap.useStartTls=false

# cas.acceptableUsagePolicy.ldap.validator.type=NONE|SEARCH|COMPARE
# cas.acceptableUsagePolicy.ldap.validator.baseDn=
# cas.acceptableUsagePolicy.ldap.validator.searchFilter=(objectClass=*)
# cas.acceptableUsagePolicy.ldap.validator.scope=OBJECT|ONELEVEL|SUBTREE
# cas.acceptableUsagePolicy.ldap.validator.attributeName=objectClass
# cas.acceptableUsagePolicy.ldap.validator.attributeValues=top
# cas.acceptableUsagePolicy.ldap.validator.dn=

REST API

To learn more about this topic, please review this guide.

# cas.rest.attributeName=
# cas.rest.attributeValue=
# cas.rest.throttler=neverThrottle

Metrics & Performance Stats

To learn more about this topic, please review this guide.

# cas.metrics.loggerName=perfStatsLogger
# cas.metrics.refreshInterval=30

Groovy Shell

Control access and configuration of the embedded Groovy shell in CAS. To learn more about this topic, please review this guide.

# shell.commandRefreshInterval=15
# shell.commandPathPatterns=classpath*:/commands/**
# shell.auth.simple.user.name=
# shell.auth.simple.user.password=
# shell.ssh.enabled=true
# shell.ssh.port=2000
# shell.telnet.enabled=false
# shell.telnet.port=5000
# shell.ssh.authTimeout=3000
# shell.ssh.idleTimeout=30000

SAML Metadata UI

Control how SAML MDUI elements should be displayed on the main CAS login page in the event that CAS is handling authentication for an external SAML2 IdP.

To learn more about this topic, please review this guide.

# cas.samlMetadataUi.requireValidMetadata=true
# cas.samlMetadataUi.repeatInterval=120000
# cas.samlMetadataUi.startDelay=30000
# cas.samlMetadataUi.resources=classpath:/sp-metadata::classpath:/pub.key,http://md.incommon.org/InCommon/InCommon-metadata.xml::classpath:/inc-md-pub.key
# cas.samlMetadataUi.maxValidity=0
# cas.samlMetadataUi.requireSignedRoot=false
# cas.samlMetadataUi.parameter=entityId

Eureka Service Discovery

To learn more about this topic, please review this guide.

eureka.client.serviceUrl.defaultZone=${EUREKA_SERVER_HOST:http://localhost:8761}/eureka/
eureka.client.enabled=true
eureka.instance.statusPageUrl=${cas.server.prefix}/status/info
eureka.instance.healthCheckUrl=${cas.server.prefix}/status/health
eureka.instance.homePageUrl=${cas.server.prefix}/
eureka.client.healthcheck.enabled=true

spring.cloud.config.discovery.enabled=false

Provisioning

SCIM

Provision the authenticated CAS principal via SCIM. To learn more about this topic, please review this guide.

# cas.scim.version=2
# cas.scim.target=
# cas.scim.oauthToken=
# cas.scim.username=
# cas.scim.password=

Password Management

Allow the user to update their account password, etc in-place. To learn more about this topic, please review this guide.

# cas.authn.pm.enabled=true

# Minimum 8 and Maximum 10 characters at least 1 Uppercase Alphabet, 1 Lowercase Alphabet, 1 Number and 1 Special Character
# cas.authn.pm.policyPattern=^(?=.*[a-z])(?=.*[A-Z])(?=.*\\d)(?=.*[$@$!%*?&])[A-Za-z\\d$@$!%*?&]{8,10}

# cas.authn.pm.reset.text=Reset your password with this link: %s
# cas.authn.pm.reset.subject=Password Reset Request
# cas.authn.pm.reset.from=
# cas.authn.pm.reset.expirationMinutes=1
# cas.authn.pm.reset.emailAttribute=mail
# cas.authn.pm.reset.securityQuestionsEnabled=true

# Used to sign/encrypt the password-reset link
# cas.authn.pm.reset.security.encryptionKey=
# cas.authn.pm.reset.security.signingKey=

The signing and encryption keys are both JWKs of size 512 and 256. The encryption algorithm is set to AES_128_CBC_HMAC_SHA_256.

LDAP Password Management

The following LDAP types are supported:

# cas.authn.pm.ldap.type=GENERIC|AD|FreeIPA|EDirectory

# cas.authn.pm.ldap.ldapUrl=ldaps://ldap1.example.edu ldaps://ldap2.example.edu
# cas.authn.pm.ldap.connectionStrategy=
# cas.authn.pm.ldap.useSsl=true
# cas.authn.pm.ldap.useStartTls=false
# cas.authn.pm.ldap.connectTimeout=5000
# cas.authn.pm.ldap.baseDn=dc=example,dc=org
# cas.authn.pm.ldap.userFilter=cn={user}
# cas.authn.pm.ldap.subtreeSearch=true
# cas.authn.pm.ldap.bindDn=cn=Directory Manager,dc=example,dc=org
# cas.authn.pm.ldap.bindCredential=Password
# cas.authn.pm.ldap.trustCertificates=
# cas.authn.pm.ldap.keystore=
# cas.authn.pm.ldap.keystorePassword=
# cas.authn.pm.ldap.keystoreType=JKS|JCEKS|PKCS12
# cas.authn.pm.ldap.poolPassivator=NONE|CLOSE|BIND
# cas.authn.pm.ldap.minPoolSize=3
# cas.authn.pm.ldap.maxPoolSize=10
# cas.authn.pm.ldap.validateOnCheckout=true
# cas.authn.pm.ldap.validatePeriodically=true
# cas.authn.pm.ldap.validatePeriod=600
# cas.authn.pm.ldap.validateTimeout=5000
# cas.authn.pm.ldap.failFast=true
# cas.authn.pm.ldap.idleTime=500
# cas.authn.pm.ldap.prunePeriod=600
# cas.authn.pm.ldap.blockWaitTime=5000
# cas.authn.pm.ldap.providerClass=org.ldaptive.provider.unboundid.UnboundIDProvider

# Attributes that should be fetched to indicate security questions and answers,
# assuming security questions are enabled.
# cas.authn.pm.ldap.securityQuestionsAttributes.attrQuestion1=attrAnswer1
# cas.authn.pm.ldap.securityQuestionsAttributes.attrQuestion2=attrAnswer2
# cas.authn.pm.ldap.securityQuestionsAttributes.attrQuestion3=attrAnswer3

# cas.authn.pm.ldap.validator.type=NONE|SEARCH|COMPARE
# cas.authn.pm.ldap.validator.baseDn=
# cas.authn.pm.ldap.validator.searchFilter=(objectClass=*)
# cas.authn.pm.ldap.validator.scope=OBJECT|ONELEVEL|SUBTREE
# cas.authn.pm.ldap.validator.attributeName=objectClass
# cas.authn.pm.ldap.validator.attributeValues=top
# cas.authn.pm.ldap.validator.dn=

JDBC Password Management

# cas.authn.pm.jdbc.sqlSecurityQuestions=SELECT question, answer FROM table WHERE user=?
# cas.authn.pm.jdbc.sqlFindEmail=SELECT email FROM table WHERE user=?
# cas.authn.pm.jdbc.sqlChangePassword=UPDATE table SET password=? WHERE user=?

# cas.authn.pm.jdbc.healthQuery=
# cas.authn.pm.jdbc.isolateInternalQueries=false
# cas.authn.pm.jdbc.url=jdbc:hsqldb:mem:cas-hsql-database
# cas.authn.pm.jdbc.failFast=true
# cas.authn.pm.jdbc.isolationLevelName=ISOLATION_READ_COMMITTED
# cas.authn.pm.jdbc.dialect=org.hibernate.dialect.HSQLDialect
# cas.authn.pm.jdbc.leakThreshold=10
# cas.authn.pm.jdbc.propagationBehaviorName=PROPAGATION_REQUIRED
# cas.authn.pm.jdbc.batchSize=1
# cas.authn.pm.jdbc.user=sa
# cas.authn.pm.jdbc.ddlAuto=create-drop
# cas.authn.pm.jdbc.maxAgeDays=180
# cas.authn.pm.jdbc.password=
# cas.authn.pm.jdbc.autocommit=false
# cas.authn.pm.jdbc.driverClass=org.hsqldb.jdbcDriver
# cas.authn.pm.jdbc.idleTimeout=5000
# cas.authn.pm.jdbc.dataSourceName=
# cas.authn.pm.jdbc.dataSourceProxy=false

# cas.authn.pm.jdbc.passwordEncoder.type=NONE|DEFAULT|STANDARD|BCRYPT|SCRYPT|PBKDF2|com.example.CustomPasswordEncoder
# cas.authn.pm.jdbc.passwordEncoder.characterEncoding=
# cas.authn.pm.jdbc.passwordEncoder.encodingAlgorithm=
# cas.authn.pm.jdbc.passwordEncoder.secret=
# cas.authn.pm.jdbc.passwordEncoder.strength=16

REST Password Management

# cas.authn.pm.rest.endpointUrlEmail=
# cas.authn.pm.rest.endpointUrlSecurityQuestions=
# cas.authn.pm.rest.endpointUrlChange=